3M Peltor X4P3E Helmet-Mounted Hearing Protectors

The 3M Peltor X4P3E is a helmet-mounted version of the slim X4 earmuff, built to clip into the accessory slots on a hard hat or work helmet. It keeps hearing protection on the helmet, so the muffs are there every time the saw starts.

Hearing protection that rides on the helmet

Chainsaws, chippers, and stump grinders are loud enough to damage hearing over a normal workday, and the muffs that get left in the truck do nothing. Helmet-mounted earmuffs like the X4P3E solve that by staying attached to the helmet. Flip them down to buck a log, swing them out to talk with the groundie, and they are still there for the next cut.

The P3E arms clip into the side accessory slots found on many hard hats and work helmets. Check that your helmet has compatible slots before you buy, and fit the arms so the cups seal fully around the ears without pressing on the helmet shell. Browse the rest of our hearing protection for headband and plug options.

Fit, care, and replacement

An earmuff only works if the cushion seals. Hair, glasses arms, and hat brims under the cup all break that seal, so keep the area clear. Wipe sweat and sawdust off the cushions at the end of the day, and replace the cushions and foam inserts when they go hard, flat, or cracked. The Peltor HYX4 hygiene kit is the matching replacement set for X4 cups.

Pick hearing protection with a noise reduction rating suited to the equipment you run, follow 3M's fitting instructions, and pair it with eye and face protection as ANSI Z133 calls for on saw work.