New England Ropes
Sassafras 16-Strand Climbing Rope
A traditional 16-strand arborist climbing line for friction-hitch work.
Every product in the store in one place. Narrow it down by department, brand, budget and how you work.
New England Ropes
A traditional 16-strand arborist climbing line for friction-hitch work.
Courant
A supple 11.9 mm 24-strand climbing line in a high-visibility pink colorway.
Yale Cordage
Yale's 11.7 mm 24-strand climbing line in the Poison Moon colorway.
Notch Equipment
A magnetic-catch tether that keeps your rope runner tidy and close at hand.
Gap Arborist Supply
Adjustable synthetic sling for setting rigging anchors fast.
Husqvarna
Auto-locking D-shaped carabiner for arborist climbing kits.
Husqvarna
A 40V battery rear-handle saw for ground crews, cleanup, and storm limbing.
Husqvarna
Professional battery top-handle saw for climbers working in the canopy.
Notch Equipment
Replacement 13 in tri-edge pruning blade for green wood.
Husqvarna
A pro split-shaft trimmer that doubles as a combi power head.
Husqvarna
Light commercial straight-shaft trimmer for jobsite cleanup.
Husqvarna
Light 25.4 cc combi power head with a trimmer attachment.
Husqvarna
High-output gas backpack blower for heavy cleanup after tree work.
Husqvarna
Heavy-duty 93.6 cc gas cut-off saw for concrete, stone, and metal.
ISA
The US consensus standard for how tree care work should be done.
ISA
The safety standard every tree care crew should keep on the truck.
ISA
The main study book for the ISA Certified Arborist exam.
Husqvarna
3/8 in pitch, .050 gauge full-comp chain for mid-to-large Husqvarna saws.
Husqvarna
Heavy .063 gauge chain for large saws and long bars.
Husqvarna
Low-vibration .325 semi-chisel chain for mid-size saws.
Gap Arborist Supply
Budget apron chaps for occasional saw users and ground crews.
Gap Arborist Supply
Stretchy saw tether that keeps a top-handle saw on your saddle.
Weaver
Modular bungee saw tether from Weaver for climbers.
Husqvarna
Pro 60 cc-class saw for felling, bucking, and storm work.
Gecko
Fresh cuff pads to keep Gecko spurs comfortable on removals.
Jameson
Pole-mounted head for setting a line over a limb from the ground.
Petzl
Petzl's assisted-braking belay device for single ropes 8.5 to 11 mm.
Petzl
GriGri with anti-panic lowering and a lead/top-rope mode selector.
Petzl
Simple aluminum figure 8 descender for rappelling and lowering.
Hitch Hiker
Hitch-based mechanical device for smooth MRS climbing.
Petzl
Petzl's mechanical prusik for MRS tree climbing.
Notch Equipment
An adjustable rope wrench for SRS climbers who want to dial friction to the rope.
Kong
A pocket-size Kong rope clamp for emergency ascending, hauling and rescue backup.
ART
A genuine replacement cam to keep your ART Positioner lanyard adjuster working right.
Climb Right
A simple cam-style rope grab for adjusting a lanyard or positioning line.
Petzl
A compact Petzl rope grab for adjusting a tree-care positioning lanyard.
DMM
A light, auto-locking DMM carabiner with a snag-free nose for everyday climbing.
Petzl
Petzl's asymmetric D locker with a three-action auto-locking gate for climbing systems.
Notch Equipment
Compact Notch hardware for quick, tidy connections in a climbing setup.
Petzl
A compact quick link for semi-permanent connections in a climbing setup.
Gap Arborist Supply
A twisted stainless shackle that turns the connection 90 degrees for cleaner alignment.
DMM
A small DMM accessory carabiner for keeping your saddle rack organized.
Petzl
A carabiner with a built-in pulley for hitch tending, hauls and redirects.
Rock Exotica
A light Rock Exotica clip for racking slings, cords and tools.
Petzl
Petzl's asymmetric D locker with a screw gate for semi-permanent connections.
Petzl
A large pear-shaped screw lock carabiner with room for rope and multiple connections.
SMC
An extra large, heat-treated steel screw-lock carabiner for heavy-duty connections.
Gap Arborist Supply
A lighter double locking snap for lanyards and positioning gear.
Petzl
A wide-opening Petzl snap connector for lanyards and large anchors.
Gap Arborist Supply
A tough steel locking snap for spliced lanyards and lines.
Weaver
A simple strap and snap for hanging a saw from your saddle.
Gap Arborist Supply
A wire core lanyard with a second leg for repositioning and staying tied in.
Gap Arborist Supply
An adjustable strap for positioning on poles and smooth spars.
Gap Arborist Supply
A ready-to-climb wire core flip line kit with two legs and an adjuster.
Petzl
An adjustable work-positioning lanyard with a hook connector for quick anchors.
Petzl
Petzl's adjustable positioning lanyard built for tree care and all-day spar work.
Gap Arborist Supply
A magnetic holder that parks your lanyard on the saddle, ready to grab.
Petzl
A ready kit that pairs the Micrograb adjuster with lanyard rope.
Gap Arborist Supply
A half-inch wire core flipline for spur climbing and removals.
ART
A roller friction saver from ART that protects bark and rope at the tie-in.
CMI
A tough webbing anchor sling for setting tie-ins and anchors around stems and limbs.
Buckingham
A tough haul bag to keep rope, saddle and hardware together on the job.
Edelrid
A rugged climbing haul bag for climbers who carry a full kit to every job.
Petzl
An 85-liter duffel that carries like a backpack, sized for a full climbing kit.
Courant
A stand-up rope bag that keeps your climb line clean and feeds it without tangles.
TreeHog
A 40-liter rope bag from TreeHog for climbers who run a full-length line.
Big Jim's
A small tending aid for climbers who want a friction hitch that releases cleanly.
DMM
A matched hitch-tending pulley and connector set for building a friction hitch system.
Yale Cordage
An 8mm hand-spliced eye-to-eye hitch cord for consistent grab and release.
Yale Cordage
A heat-resistant 8mm split tail for climbers who tie their own friction hitch.
CMI
A small, strong pulley for hitch tending, haul systems and rescue kits.
DMM
The hitch-tending pulley many tree climbers build their friction hitch around.
DMM
A quick-clip accessory hook for keeping tools and gear within reach aloft.
SawPod
A purpose-built place to park your saw aloft so it is not swinging off your saddle.
DMM
Strong, smooth rings for building climbing anchors and friction savers.
Petzl
An openable ring that installs around slings and anchors without threading an end.
Petzl
A small, openable swivel that installs directly on a saddle bridge or sling.
Husqvarna
A forestry helmet system with visor and earmuffs for felling, bucking and ground saw work.
Kask
A popular climbing helmet for arborists who want comfort, airflow and accessory options.
Petzl
A ventilated work-at-height helmet with a secure fit for long days in the canopy.
Pfanner
A fully integrated arborist helmet with built-in hearing and face protection.
Buckingham
A Buckingham climbing saddle aimed at climbers who value freedom of movement.
Buckingham
A straightforward, supportive Buckingham saddle for working climbers.
Buckingham
A comfort-focused Buckingham saddle for climbers who log long hours aloft.
Petzl
A supportive tree care harness with a sliding bridge for all-day comfort.
Teufelberger
A semi-rigid, highly adjustable saddle for climbers who want support and options.
Edelrid
An elastic chest harness that pairs with the TreeRex saddle for efficient ascent.
Weaver
A simple Weaver chest harness that keeps your saddle and ascent gear in position.
Climb Right
Light aluminum removal spurs with wide, padded uppers for long days on spikes.
Climb Right
Lightweight aluminum climbers with stiff steel-backed pads for removal climbers.
Buckingham
Tough steel Buckingham spikes with wide Big Buck pads for everyday removal work.
Buckingham
Basic steel Buckingham climbers with lower straps, ready for the pads you choose.
Buckingham
Steel Buckingham tree spikes with traditional T-pad uppers for removal climbers.
Buckingham
Wide, padded replacement uppers that make long days on spurs easier on your calves.
Buckingham
Wide Big Buck uppers with a quick hook-and-loop closure for fast on and off.
Buckingham
Screw and dowel style Buckalloy tree gaffs to bring worn Buckingham spurs back.
Edelrid
Replacement upper straps and pads for Edelrid Talon climbing spurs.
Notch
Pole-mounted slingshot that puts a throw weight into high unions fast.
Gap Arborist Supply
Throw line, weights and storage in one kit for new climbers.
Gap Arborist Supply
Collapsible storage that keeps throw line flaked, clean and tangle-free.
Samson
Slick, thin Dyneema throw line that slides through crotches with little drag.
Teufelberger
Slick, lightweight throw line for setting climbing lines with less snagging.
Teufelberger
A slick, durable throw line built for clean throws and smooth pull-back.
Petzl
A streamlined throw weight that slips through foliage and pulls back clean.
Gap Arborist Supply
A matched set of tree climbing gear to get you up and working on rope.
Arbortec
Lighter cut-protective chainsaw boots in high-visibility lime green.
Arbpro
Rugged leather chainsaw boots from Andrew for forestry and tree crews.
Arbpro
Arbpro work boots for arborists who split the day between climbing and ground work.
Arborwear
A simple fleece neck tube that keeps the wind off on winter jobs.
Arborwear
A warm, close-fitting knit cap for cold mornings on tree jobs.
Husqvarna
A trucker-style Husqvarna cap for ground days, shop days and the drive home.
Arborwear
A heavyweight two-layer hoodie built for cold mornings and hard tree work.
Arborwear
Arborwear's two-layer heavyweight hoodie in navy for cold days on the job.
Arborwear
A bright, technical double-layer pullover for cold days on tree crews.
Arborwear
Stretchy, tough climbing pants that move with you up the tree.
Arbortec
Heavy duty suspenders that keep chainsaw pants up and in position.
Silky
A factory replacement blade to bring a dull Sugoi back to full speed.
Silky
A straight-bladed 300 mm Silky pruning saw for clean, controlled cuts.
Silky
A pistol-grip, curved 330 mm Silky saw built for fast, aggressive cuts.
Silky
Silky's fast, curved, taper-ground saw for climbers and pro pruners.
Silky
A 330 mm curved pull saw for climbers who prune and remove limbs all day.
Notch
A four-section telescoping pole saw that reaches about 20 feet from the ground.
Jameson
A complete Jameson pole pruner and pole saw kit with fiberglass sectional poles.
Marvin
A cast saw head that turns a pole into a pole saw, or replaces a broken one.
Gap Arborist Supply
A 6-foot foam-filled fiberglass pole section for pruner and saw setups.
Jameson
A light 8-foot Jameson fiberglass section for pole saws and pruners.
Peavey Mfg
A traditional 12-foot ash pole for mounting pole saw and pruner heads.
Felco
The classic bypass hand pruner, with replaceable parts that last for years.
Marvin
A heavy-duty Marvin pole pruner head with a single pulley for bigger cuts.
Marvin
A replacement Marvin pole pruner head for clean bypass cuts from the ground.
Buckingham
A mechanical friction device for climbers working moving rope systems.
DMM
DMM's Kinisi arborist saddle, built for climbers who spend all day in the tree.
Petzl
A full-body rope access harness with an integrated chest ascender and FAST buckles.
Husqvarna
Ready-to-pour 50:1 ethanol-free premix in quart cans, sold by the case.
Gap Arborist Supply
A simple adjustable foot loop that helps you stand and push while ascending.
CMI
A boot-mounted rope ascender that turns every step into upward progress.
SAKA
A knee ascender for efficient rope walking that folds away once you are up.
Gap Arborist Supply
A 9/16-inch rope sling with a spliced eye for setting rigging points.
Gap Arborist Supply
Clip-on ear muffs for slotted helmets, for saw, chipper and grinder work.
Bigfoot
Composite outrigger pads that spread the load under bucket trucks and cranes.
Weaver
A cover for two-man aerial buckets that keeps weather and debris out.
Gap Arborist Supply
A heavy-duty wheel chock for tree trucks, chippers and trailers.
Gap Arborist Supply
A bucket-mounted saw holder that keeps a chainsaw secure and in reach aloft.
Gap Arborist Supply
A 6-foot self-retracting web lanyard for fall protection at height.
Petzl
A single-leg energy-absorbing lanyard for fall arrest at height.
Safewaze
A budget-friendly harness and lanyard kit for aerial lift crews.
Gap Arborist Supply
A 3 x 8 foot HDPE mat for protecting turf and soft ground on tree jobs.
Gap Arborist Supply
HDPE ground mats that keep trucks and equipment from rutting a client's yard.
Husqvarna
A lightweight 3/8" x .050" Husqvarna bar that takes weight off the front of the saw.
Husqvarna
Husqvarna's narrow-kerf bar for the X-Cut SP21G chain system.
Oregon
A replacement Oregon bar for .325" pitch, .050" gauge chain on mid-size saws.
Husqvarna
A hard Husqvarna case for transporting a chainsaw and its gear.
Husqvarna
Husqvarna's hard plastic saw case for clean, protected transport and storage.
Husqvarna
Apron-style leg protection for ground sawing, bucking and cleanup crews.
Clogger
Lightweight, breathable chainsaw pants for climbers and hot-weather ground work.
Clogger
Saw protection in a work-jean look for crews, homeowners and firewood cutters.
Clogger
Very light chainsaw pants for climbers and sawyers who work in heat.
Eagle
Metal safety can in green to keep oil and combustibles separate from gas on the truck.
Husqvarna
Ethanol-free 50:1 premixed fuel in a bulk size for crews running several saws.
Husqvarna
Synthetic blend 2-stroke mixing oil sized for a 5 gallon can of fuel at 50:1.
Husqvarna
Synthetic blend 2-stroke oil for a 2.5 gallon batch of 50:1 fuel.
No-Spill
Red push-button fuel can for clean refueling of saws and small engines.
Hardhead
Plastic felling and bucking wedge that is safe to hit with an axe and safe near a chain.
Weaver
Belt and pouches that keep wedges, tape and saw tools within reach.
Gap Arborist Supply
The bar wrench, or scrench, every saw kit should have: bar nuts, tension and carb tweaks.
Gap Arborist Supply
Replacement brush chipper knife measuring 7.25 x 4 x 3/8 inches.
Gap Arborist Supply
Aftermarket replacement knife for the Vermeer BC1800XL brush chipper.
Gap Arborist Supply
Aftermarket replacement knife for the Vermeer BC2100 whole-tree chipper.
Grounds Keeper
Stiff-tined scrape rake that cleans chips and twigs out of lawns after tree work.
Grounds Keeper
Replacement handle that puts a broken Grounds Keeper rake back in service.
Grounds Keeper
Spring steel replacement tines that restore a worn Grounds Keeper rake.
Hasegawa
Japanese aluminum tripod ladder for pruning, hedges and orchard work.
Husqvarna
All-round wooden-handled axe for limbing, driving wedges and light splitting.
Husqvarna
Long-handled splitting axe with a wedge head for breaking rounds into firewood.
Husqvarna
Composite-handled multi-purpose axe for limbing, splitting and general chores.
Spencer
Belt-mounted spring-return logging tape for bucking logs to length.
Spencer
Belt-mounted Spencer loggers tape for one-person measuring on the landing.
Spencer
Replacement 50 ft blade that puts a worn Spencer logging tape back in service.
Husqvarna
Long-handled pick for dragging, flipping and stacking logs and firewood.
LogRite
Lightweight aluminum cant hook for rolling and positioning logs.
LogRite
Aluminum-handled pickaroon for moving rounds, logs and firewood without bending.
LogRite
Two-person log lifting tool with a center hook and aluminum handle.
Husqvarna
Handheld 36 V battery blower for quiet, quick cleanup at the end of a job.
Husqvarna
Fast charger for Husqvarna 36 V BLi batteries, built for crews that run all day.
Husqvarna
Professional 36 V top-handle saw for trained climbers working aloft.
Husqvarna
28 cc handheld gas blower for fast cleanup on tree jobs and around the yard.
Husqvarna
Big-displacement backpack blower for crews that clean up a lot of ground every day.
Husqvarna
Husqvarna's biggest saw, for giant trunks, big stump work and chainsaw milling.
Husqvarna
The classic 70 cc pro saw for removals, bucking and storm cleanup.
Husqvarna
A 90 cc class saw for big removals, large hardwood and storm work.
Husqvarna
A 50 cc all-round saw for firewood, storm cleanup and property work.
Husqvarna
Telescoping gas pole saw for pruning and clearance work from the ground.
Husqvarna
A light, fast 50 cc pro saw for limbing, bucking and small removals.
Husqvarna
Husqvarna's modern 70 cc pro saw for removals, bucking and storm cleanup.
Husqvarna
A modern 90 cc class pro saw for big wood, storm work and large removals.
Husqvarna
A 35 cc top-handle saw for pruning and limbing in the tree.
Husqvarna
A very light 27 cc top-handle saw for pruning and fine work aloft.
Husqvarna
Husqvarna's pro top-handle saw for removals and heavy pruning aloft.
Husqvarna
Replacement in-tank fuel filter for the Husqvarna T435 top-handle saw.
NGK
A common resistor spark plug for chainsaws and small two-stroke engines.
Gap Arborist Supply
In-tank replacement fuel filter to keep debris out of your saw's carburetor.
Green Manufacturing
Straight replacement pocket for the Greenteeth 700 Series stump grinder system.
Green Manufacturing
Allen head mounting bolt for Greenteeth stump grinder teeth and pockets.
Gap Arborist Supply
Carbide-tipped replacement teeth for standard stump grinder cutter wheels.
Corona
A sturdy steel leaf rake for cleaning up after tree work and landscaping.
Husqvarna
Battery-powered 4-gallon backpack sprayer for plant health and landscape work.
Husqvarna
Square-profile string trimmer line for clean cuts in grass and weeds.
Jail Brake
Tree-mounted friction device for controlled lowering on rigging jobs.
DMM
A climber pulley built to tend a friction hitch on a doubled-rope system.
Gap Arborist Supply
A textile canopy anchor for setting a secure tie-in point aloft.
Husqvarna
A tune-up kit with the wear parts a 445 or 450 needs each season.
NGK
A 14 mm resistor plug in a colder heat range for chainsaws and small engines.
NGK
A compact 10 mm resistor plug in a colder heat range for small engines.
Husqvarna
A general-purpose diamond blade for power cutters on jobsite cutting work.
Gap Arborist Supply
Threaded rods for bracing weak unions and split stems in trees.
Gap Arborist Supply
Galvanized steel strand for general-purpose, non-critical uses.
Gap Arborist Supply
Extra-high-strength galvanized steel strand for tree support systems.
Gap Arborist Supply
A 3/8 in eye bolt for anchoring light cabling systems in trees.
Gap Arborist Supply
A galvanized lag eye for anchoring light cable systems in small to medium limbs.
Gap Arborist Supply
Hook-style lag anchors for cabling leads with a cable that wraps the J.
Lac Balsam
A brush-on, water-based tree wound dressing for bark damage and grafts.
Gap Arborist Supply
Soft, wide staking web on a roll for supporting newly planted trees.
Gap Arborist Supply
Galvanized U-bolt wire rope clips for guying trees and making eyes in cable.
Duckbill
Drive-in earth anchors for guying smaller newly planted trees.
Distel
Fresh pads, rings and straps to put worn Distel climbers back in service.
Gap Arborist Supply
A speedline setup for zipping brush and wood over obstacles to the drop zone.
Rock Exotica
A rigging pulley for redirecting and managing lowering lines on removals.
CMI
A steel-sheave rigging block for 5/8 in lowering lines on removal work.
ISC
A compact ISC pulley for light rigging and redirects on lines up to 5/8 in.
Petzl
A small aluminum rigging plate for organizing carabiners at an anchor.
Gap Arborist Supply
A two-sheave swing-side pulley for building compact mechanical advantage systems.
Petzl
A two-sheave in-line pulley for riding tensioned lines and speedlines.
Crosby
A choker hook that turns a length of chain into a sliding log choker.
Crosby
A forged connecting link for joining chain, hooks and rings in the field.
Gap Arborist Supply
A galvanized pinned connector for chain, cable and hitch work around the yard.
Buckingham
A medium friction lowering device for controlled lowering on everyday removals.
Good Rigging
A trunk-mounted lowering device and winch in one, for crews that rig big wood.
Hobbs
A trunk-mounted friction lowering device built for heavy rigging control.
Buckingham
The large friction lowering device for bigger rigging lines and heavy wood.
Maasdam
A replacement handle to get a Maasdam continuous rope puller back to work.
Maasdam
A rope come along that pulls any length of rope for tree and yard work.
Petzl
A small, efficient progress capture pulley for haul systems and SRT tending.
Buckingham
A friction lowering device and soft anchor sling, ready to mount and rig.
Weaver
A packaged speedline setup from Weaver for zipping brush to the drop zone.
Gap Arborist Supply
An adjustable 3/4 in rope sling for anchoring heavy rigging blocks.
Gap Arborist Supply
An adjustable 5/8 in rope sling for hanging blocks on any trunk size.
Gap Arborist Supply
A 5/8 in x 20 ft rope sling for setting chokers on crane-assisted removals.
Gap Arborist Supply
Soft endless polyester slings for crane picks, rigging anchors and lifts.
Gap Arborist Supply
A 1/2 in rope sling, or bull tail, for anchoring blocks and tying off pieces.
Gap Arborist Supply
Flat sewn webbing slings for block anchors, log lifts and redirects.
CMI
Sewn webbing loops for quick anchors, redirects and light rigging.
Gap Arborist Supply
A long, heavy rigging sling with an eye at each end for big removals and wide stems.
Courant
A 50-liter carry bag that swallows a climbing line, saddle and hardware.
Gap Arborist Supply
Rope-only lanyard for climbers rebuilding a worn flipline with their own hardware.
Sterling Rope
Stretchy accessory cord cut to length for gear tethers, bag closures and tie-downs.
Samson Rope
A 12-strand single-braid 1/2 in line with an easy hand and simple splicing.
Teufelberger
The classic blue-and-white 16-strand climbing line for traditional hitch climbers.
Teufelberger
A firm, smooth 16-strand climbing line for hitch climbers on moving rope.
Petzl
A 12.5 mm arborist line made to run in Petzl mechanical friction devices.
Sterling Rope
A tough, low-stretch 11 mm polyester static line for SRT and rescue kits.
Sterling Rope
A 12.5 mm static line sized for the friction devices most arborists use.
Samson Rope
A 1/2 in rigging line for small-to-medium wood, pull lines and everyday lowering.
Samson Rope
A 3/4 in 12-strand rigging line for heavy wood on big removals.
Samson Rope
A 5/8 in double-braid rigging line for medium-to-heavy wood.
All Gear
A tough sleeve that protects rope and slings from bark, crotches and edges.
Gap Arborist Supply
A basic slide-on sleeve that keeps rope and slings from chafing.
Teufelberger
An 8 mm hitch cord by the foot for building friction hitches and split tails.
Yale Cordage
Technical cord by the foot for climbers who build their own loops and rigging pieces.
Tree Access
A simple chest harness that keeps your SRT ascent system tight and efficient.
ISC
A small saddle clip that keeps a flipline stowed and out of the way.
Rock Exotica
A large gear carrier that holds hardware and slings on your saddle.
3M
Hearing protection with a built-in FRS radio for climber-to-ground talk.
Sena
A Bluetooth intercom with Mesh for hands-free climber and ground crew talk.
Sena
Helmet-integrated communication for crews who want hands-free talk.
ERB Safety
Light, low-cost camo safety glasses for everyday tree work.
Petzl
A clear eye-protection visor made to mount on Petzl helmets.
BloodStopper
A compress bandage for putting fast pressure on a bleeding wound.
WoundSeal
A powder that seals minor cuts and nicks fast on the job.
Husqvarna
Dexterous work gloves for saw work, felling and bucking.
Wonder Grip
Thin, grippy coated gloves that let you feel your hitch and hardware.
Husqvarna
Replacement cushions and foam inserts that bring tired Husqvarna muffs back to spec.
3M
Slot-mount Peltor muffs for crews who live under a helmet all day.
Gap Arborist Supply
An 18-inch cone that tells everyone on site where not to stand.
Gap Arborist Supply
Advance warning for drivers so your crew has room to work along the road.
Gap Arborist Supply
Breathable hi viz green mesh vest so drivers and operators see your ground crew.
Clogger
Light, cool apron-style chaps for sawyers who spend all day on the ground.
Gap Arborist Supply
Heavy-duty blue round sling for crane-assisted removals and big picks.
Husqvarna
A proven 74 cc cut-off saw for concrete, pavers, pipe and steel on the jobsite.
Husqvarna
Tough, long-wearing trimmer line for crews who clean up heavy growth after the tree work.
Husqvarna
Dependable everyday trimmer line for cleanup around the jobsite.
Notch
Replacement tether that links a Rope Wrench to your friction hitch on SRS.
Gap Arborist Supply
A simple polymer hook for hanging pruning tools on your saddle.
Gap Arborist Supply
An adjustable rope friction saver that fits small leaders and big unions alike.
Samson Rope
Slick, low-friction throw line for setting climbing and rigging lines high.
Clogger
Light, breathable chainsaw pants built so climbers actually keep them on.
Edelrid
Short lengths of Edelrid static rope for lanyards, slings and rigging bits.
Edelrid
Short lengths of Edelrid static rope for lanyards, slings and rigging bits.
Masdaam
A portable hand-operated rope winch for felling, pulling and positioning loads.
Notch
Ergonomic spurs for removal climbers who want comfort without top-tier prices.
Yale Cordage
An 11mm pink and black static climbing line that is easy to spot in any canopy.
Clogger
The premium Clogger Zero chainsaw pant for climbers who log big hours.
K&H Distributing
A tough plastic felling wedge that every sawyer should carry in the back pocket.
Husqvarna
The one tool every Husqvarna saw owner should have on the belt.
Pferd
A dozen quality round files for keeping saw chain sharp in the field.
Mastodon
A 1/2 in. 12-strand rigging line for everyday limb lowering and light removals.
Yale Cordage
A classic 1/2 in. 16-strand line for traditional hitch climbing and everyday work.
All Gear
A 24-strand 11.7mm climbing line in a 200 ft length for taller trees.
Marlow
A compact 11.5mm arborist climbing line from Marlow for hitch and device climbing.
Marlow
A low-stretch 11.7mm Marlow line in lime and gray for SRS and doubled-rope work.
Marlow
An 11.8mm low-stretch Marlow climbing line in blue and orange.
Marlow
An 11.8mm low-stretch Marlow climbing line in purple and lime.
Teufelberger
A slim 11.5mm climbing line in a 200 ft length for tall trees and SRS.
Yale Cordage
A dependable 11.7mm 24-strand polyester line for everyday tree climbing.
Yale Cordage
An 11.7mm 24-strand Yale climbing line for hitch and device climbing.
Yale Cordage
An 11.7mm low-stretch Yale line aimed at SRS and mechanical device climbing.
Pensafe
A tool-tethering carabiner for keeping small tools attached when you work at height.
Gap Arborist Supply
An adjustable 1/2 in. sling with a ring for quick block and redirect anchors.
Haix
Cut-protective leather chainsaw boots with high-visibility orange for saw-heavy work.
CAMP
A large aluminum oval with a triple-action auto-lock gate for pulleys and devices.
DMM
An aluminum oval with a Locksafe gate and a captive bar to keep devices in place.
ISC
A wide pear-shaped aluminum connector for hitches, anchors and lanyards.
ISC
A symmetrical aluminum oval with a triple-action gate for pulleys and devices.
ISC
A compact oval with ISC's Supersafe auto-locking gate for tight hitch systems.
Pro-Climb
An affordable aluminum auto-locking carabiner for everyday climbing connections.
Husqvarna
A pro-grade straight-shaft battery trimmer for cleanup on tree and landscape jobs.
Husqvarna
A battery cut-off saw for concrete, pavers and pipe on hardscape-heavy jobs.
Husqvarna
A pro battery top-handle saw for in-tree pruning and light removals.
Silky
A fine-tooth blade for the Silky Zubat handle, for smoother pruning cuts.
Husqvarna
A 65cc pro backpack blower for clearing sawdust, leaves and chips after tree work.
ISA
ISA's practical guide to cabling, bracing, guying and propping trees.
Gap Arborist Supply
A training reference on single rope technique for working arborists.
Gap Arborist Supply
A training book for the ground worker on a tree care crew.
Gap Arborist Supply
Jeff Jepson's pocket-size field guide to tree climbing knots and techniques.
Gap Arborist Supply
Jeff Jepson's illustrated guide to planning and making safe felling cuts.
Gap Arborist Supply
A fiberglass bucket protector with a built-in step for aerial lift work.
Gap Arborist Supply
A heavy forged ring for joining cables in tree support systems.
Husqvarna
A 12 in replacement bar for Husqvarna gas pole saws, 44 drive link chain.
Husqvarna
A weight-saving 3/8 x .063 bar for Husqvarna pro saws.
Husqvarna
A 44 drive link replacement chain for Husqvarna gas pole saws.
Husqvarna
A 3/8 micro, .050 gauge replacement chain sold to fit your bar length.
Husqvarna
Full chisel skip chain for long bars and big-diameter wood.
Oregon
Replacement 3/8 low profile chain for the Stihl MS200T top-handle saw.
Gap Arborist Supply
A simple, reliable saw lanyard for clipping a chainsaw to your saddle.
Gap Arborist Supply
A stretch saw lanyard that stays short when stowed and reaches when you cut.
Gap Arborist Supply
A strap and ring that gives a saw a secure lanyard attachment point.
Gap Arborist Supply
A stretch saw lanyard with rings at both ends for flexible setups.
Arbortec
Lightweight, stretchy chainsaw protective pants in Realtree camo with brown accents.
Arbortec
Lightweight, stretchy chainsaw protective pants in Realtree camo with orange accents.
Arbortec
Lightweight, stretchy chainsaw protective pants in Realtree camo with lime green accents.
Husqvarna
A big rear-handle Husqvarna saw for felling and bucking large timber.
Gap Arborist Supply
A large aluminum figure 8 with ears for controlled descents on big rope.
Petzl
A descender with an integrated pulley for lowering and switching to haul.
Climbing Technology
A foot ascender that makes SRS rope walking faster and easier.
Climbing Technology
A replacement foot strap that keeps a Quick Step snug on your boot.
Climbing Technology
An ascender that mounts on your spur for rope ascent on removals.
Edelrid
A foot-worn ascent aid from Edelrid for faster rope climbing.
Notch
A foot ascender from Notch for faster, easier SRS climbing.
Petzl
A bungee knee system that speeds up rope walking with a foot ascender.
Climbing Technology
A two-handle ascender built for arborist SRS climbing.
ISC
A hand ascender with a safety pin to help prevent accidental rope release.
Rock Exotica
A mechanical friction device that replaces a hitch on MRS and SRS.
Petzl
An auxiliary brake that turns a Zigzag into an SRS device.
Climbing Technology
Rope clamp and pulley in one unit for progress capture and hauling.
ART
Replacement release lever for the ART Positioner lanyard adjuster.
ART
Mechanical lanyard adjuster with a release lever for fast length changes.
Gibbs
Mechanical adjuster for shortening and lengthening a positioning lanyard.
3-IN-ONE
Dry graphite lubricant for carabiner gates, hinges, and small hardware.
DMM
Symmetric oval auto-locking carabiner for pulleys and devices.
DMM
Auto-locking carabiner with a captive bar to hold an eye in place.
DMM
Large auto-locking oval carabiner for pulleys and multi-piece setups.
DMM
Large oval carabiner with DMM's three-stage Locksafe gate.
ISC
Auto-locking offset oval that centers devices and favors the spine.
Rock Exotica
Large auto-locking carabiner with room for rope and stacked hardware.
Rock Exotica
Black auto-locking D carabiner for everyday climbing connections.
Rock Exotica
Popular auto-locking D carabiner for arborist climbing systems.
Rock Exotica
Auto-locking oval carabiner for pulleys and rope grabs.
Kong
Positioning aid that keeps a carabiner from rotating and cross-loading.
Singing Tree
Machined compact connector for low-profile climbing and rigging links.
DMM
Locking gear-racking carabiner for tools and kit on the saddle.
ISC
Non-locking bent gate carabiner for fast clips and gear racking.
Kong
Tough non-locking steel oval for gear handling and wear-prone jobs.
Courant
Saddle tool hook for hanging a saw or gear within easy reach.
DMM
Wire gate racking carabiner for organizing gear on the saddle.
Shembiner
Saddle hook for parking a top-handle chainsaw while you reposition.
ISC
Steel screwgate carabiner for wear-prone rigging and anchors.
SMC
Large steel screw lock carabiner for rigging and wide connections.
Edelrid
Double locking steel snap hook for lanyards and positioning.
ISC
Self-locking snap hook with a swivel eye to stop lanyard twist.
Buckingham
A stretchy saw tether with a steel ring end for climbers running a saw aloft.
Buckingham
A high-visibility bungee saw lanyard with a snap end for quick clip-on and off.
Husqvarna
A replacement lanyard eyelet for Husqvarna saws used aloft.
Reecoil
A retractable reel-style saw lanyard sized for heavier saws in the tree.
Weaver
A coiled bungee saw tether that stays compact and out of the way.
Weaver
A bungee saw lanyard built to move between saws and saddles.
Samson
A rope buckstrap-style positioning lanyard made from Safety Blue Hi-Vee.
Gap Arborist Supply
A wire-core flipline with a prusik adjuster for removals and spur climbing.
Samson
An all-rope positioning lanyard kit in Hi-Vee for everyday tree work.
Petzl
A steel-core adjustable flipline with an integrated adjuster for removal climbers.
Sterling
An all-rope Sterling positioning lanyard kit for everyday climbing work.
Sterling
A Sterling rope lanyard paired with the ART Positioner mechanical adjuster.
Sterling
An all-rope Sterling flipline with a classic prusik adjuster.
Yale Cordage
A Yale rope positioning lanyard with a mechanical rope grab adjuster.
Yale Cordage
A Yale rope lanyard with the ART Positioner for smooth, hitch-free adjustment.
Yale Cordage
A Yale rope positioning lanyard kit finished with a triple-locking snap.
Yale Cordage
An all-rope Yale positioning lanyard kit for everyday climbing.
Yale Cordage
A Yale rope positioning lanyard kit for daily climbing work.
Gap Arborist Supply
A lightweight snap for running a prusik-style adjuster on your lanyard.
Samson
A replacement lanyard rope in Blaze for refreshing a worn 2-in-1 setup.
Gap Arborist Supply
A budget-friendly rope lanyard made from assorted arborist rope.
Teufelberger
A small Teufelberger accessory for keeping a rope lanyard setup in order.
Gap Arborist Supply
Clips that keep lanyard tail stowed and out of the way on your saddle.
Gap Arborist Supply
A replacement rope lanyard in Poison Moon for refreshing a worn setup.
Sterling
A Sterling rope lanyard terminated with a triple-locking snap.
Yale Cordage
A Yale Spearmint rope lanyard with a durable steel double-locking snap.
Gap Arborist Supply
A crane tie-in assembly with connectors for climbers working off a crane.
Gap Arborist Supply
A dedicated climber connection for crane-assisted tree work.
Buckingham
A Buckingham friction saver that protects the tree and your climbing line.
Buckingham
Classic two-ring webbing cambium saver for climbers who want simple and reliable.
Clogger
Cut-resistant sleeve that adds a layer of protection to the line near your saw.
DMM
A small cone that helps friction savers and anchors slide out of the tree cleanly.
Fitch Saver
Add a redirect mid-climb without untying or reaching for a rope end.
KM Tree
Adjustable-length ring saver that fits a wide range of stem sizes.
Teufelberger
Adjustable anchor that shares your tie-in across two attachment points.
Teufelberger
Teufelberger anchor system for protecting the tie-in point and your climbing line.
Teufelberger
Genuine replacement rope for the Teufelberger Pulleysaver adjustable saver.
Arbortec
A 50L backpack that hauls a full climbing kit into the backyard on your shoulders.
Petzl
A rugged 65L duffel that carries a full climbing kit and rope to the job.
Weaver
A roomy, tough bag for keeping a climbing kit together and off the truck floor.
Edelrid
A rope bag that keeps your climbing line clean, flaked and ready to run.
Husqvarna
A 30L backpack rope bag that keeps your line clean and your hands free.
Falteimer
A collapsible throw line cube that sets up open and packs flat.
FTC
Throw line storage that keeps your line flaked and ready for clean throws.
Petzl
Folding throw line cube from Petzl that opens for throwing and packs flat.
Weaver
Simple open-top bucket that keeps throw line tangle-free and ready.
Yale Cordage
Heat-resistant 10mm hitch cord with terminated eyes for moving-rope climbing.
Yale Cordage
10mm Beeline eye-to-eye hitch cord in black, easy to pick out on the bridge.
Armor Prus
Slim 8mm hitch cord with sewn eyes for a grippy, responsive friction hitch.
Samson Rope
3/8 in. Tenex cord with sewn eyes for prusik hitches and general use.
Samson Rope
Hand-spliced hitch cord from Samson made for friction hitches on climbing lines.
Teufelberger
Slim 8mm Teufelberger hitch cord with sewn eyes for responsive friction hitches.
Teufelberger
Middle-size 9mm Epicord hitch cord with sewn eyes for balanced grip and release.
Teufelberger
Slim 8mm Epicord hitch cord with sewn eyes for a firm, responsive grip.
Teufelberger
9mm Epicord prusik sized for secured footlocking ascents.
Teufelberger
10mm polyester hitch cord with sewn eyes for smooth hitches on larger ropes.
Yale Cordage
Slim, heat-resistant Beeline hitch cord with sewn eyes for smaller ropes.
Yale Cordage
A Beeline prusik sized for secured footlocking on a single or doubled line.
Ocean
Small polyester loop with a thimble eye for accessory attachments.
Teufelberger
A 10mm hitch cord loop matched with a Pinto pulley for a clean, self-tending hitch.
Teufelberger
An adjustable sling for anchors and attachment points that changes length to fit the tree.
Yale Cordage
A 10mm Beeline cord loop with a steel ring for anchors, friction savers and hitches.
Teufelberger
A white hitch cord split tail with a tight sewn eye for a tidy, compact hitch.
Yale Cordage
Black 10mm Beeline hitch cord with a sewn eye for your climbing hitch.
CMI
A small pulley that sits under your hitch and keeps slack moving as you climb.
CMI
A compact pulley with an attached shackle for quick redirects and light hauling.
DMM
A small accessory that keeps your Pinto pulley setup aligned and tidy.
Petzl
A small, light Petzl pulley that lives on the saddle for hitch tending and redirects.
Petzl
A strong, efficient prusik-minding pulley for haul systems and redirects.
Singing Tree
A pulley for the Rope Wrench system that helps tend slack on single-rope climbs.
SMC
A light, compact pulley for hitch tending, redirects and simple hauls.
ISC
Hard-wearing steel rings for savers, anchors and rigging where rope runs often.
Gap Arborist Supply
Sling and hardware for a releasable base-tied anchor on SRS climbs.
Petzl
A ball bearing swivel for climbing and rescue systems that keeps twists out.
Buckingham
A Buckingham climbing saddle built for comfort on long days in the tree.
Buckingham
A straightforward Buckingham climbing saddle for regular tree work.
Edelrid
A European arborist saddle with a replaceable rope bridge and supportive waist belt.
Husqvarna
An arborist climbing saddle from Husqvarna's tree care range.
Petzl
A Petzl tree climbing saddle with shoulder straps for single-rope technique.
Safewaze
A full body fall arrest harness for bucket truck and aerial lift crews.
Buckingham
A replacement bridge that keeps a Buckingham ErgoLite saddle in service.
Buckingham
Shoulder straps that retrofit to a Buckingham ErgoVation saddle.
Buckingham
A bridge for setting up an ErgoVation saddle for single-rope climbing.
Buckingham
Shoulder suspenders that carry tool weight on a compatible Buckingham saddle.
Edelrid
A replacement rope bridge for the Edelrid TreeRex saddle.
Petzl
An add-on seat for Petzl SEQUOIA saddles for long stretches hanging in the tree.
Petzl
A chest harness with an integrated CROLL ascender for single-rope climbs.
Petzl
A light chest harness that pairs with a seat harness for upright, balanced climbing.
Teufelberger
Factory replacement bridge for the ANSI version of the Teufelberger treeMOTION saddle.
Teufelberger
Knotted rope replacement bridge for the Teufelberger treeMOTION evo saddle.
Teufelberger
A rope-based accessory part for configuring the Teufelberger treeMOTION evo saddle.
Teufelberger
Add-on shoulder straps that carry part of a loaded treeMOTION saddle's weight.
Teufelberger
Flat webbing bridge option for Teufelberger treeMOTION saddles.
Tree Austria
Compact stainless steel shackle for saddle bridge and attachment-point setups.
Tree Austria
Replacement bridge for the Tree Austria 3.2 saddle.
Weaver
A traditional American-style climbing saddle for everyday tree work.
Weaver
The classic Weaver Cougar saddle with a batten seat for long hours in the tree.
Weaver
A Weaver climbing saddle with a supportive batten seat for long work positioning.
Climb Right
Lightweight aluminum tree climbers fitted with L-shaped pads.
Climb Right
Lightweight aluminum tree climbers fitted with shin cups.
Climb Right
Lightweight aluminum tree climbers fitted with T-pads.
Climb Right
Lightweight aluminum tree climbers fitted with Weaver ProCool wrap pads.
Climb Right
Lightweight aluminum tree climbers fitted with Weaver Super Climber pads.
Climb Right
Lightweight aluminum tree climbers fitted with Climb Right Ultra Light pads.
Buckingham
Durable steel tree climbers from Buckingham, fitted with L-shaped pads.
Buckingham
Durable steel tree climbers from Buckingham, fitted with shin cups.
Buckingham
Durable Buckingham steel tree climbers fitted with Weaver ProCool hook-and-loop pads.
Buckingham
Durable steel tree climbers from Buckingham, fitted with Weaver steel support pads.
Gap Arborist Supply
Rigid, lightweight cast aluminum pads that keep spur shanks in line with your leg.
Climb Right
Low-weight calf pads for Climb Right tree climbers.
Weaver
Classic slotted L-pads: a simple, low-cost replacement for tree spurs.
Weaver
Ventilated wrap pads that support the calf on hot removal days.
Weaver
Climber pads with a steel support for climbers who want a stiffer, steadier spur.
Klein Tools
Steel Klein Tools climbers set up for tree work with Big Buck pads.
Klein Tools
Steel Klein Tools climbers set up for tree work with Weaver ProCool wrap pads.
Klein Tools
Steel Klein Tools climbers set up for tree work with shin cups.
Klein
Durable adjustable steel climbers with T-style pads for removal and utility climbers.
Distel
Light carbon-shank tree spurs from Distel for climbers who spend all day on gaffs.
Buckingham
Replacement adjustable sleeve that restores height adjustment on Buckingham steel spurs.
Buckingham
A simple template that keeps your spur gaffs filed to the right shape.
Climb Right
Fresh tree gaffs to bring a worn set of Climb Right spurs back into service.
Climb Right
Replacement height sleeve and hardware for adjustable Climb Right steel climbers.
Climb Right
Spare screws to keep the pads tight on Climb Right Ultralight climbers.
Distel
Genuine Distel M8 eye bolt for keeping your Distel spurs complete and serviceable.
Distel
Tree gaffs that bring worn Distel and Gecko spurs back to full bite.
Tree Hog
Replacement tree gaffs for keeping Tree Hog aluminum spurs in service.
Weaver
Padding that sits between the spur shank and your leg for all-day comfort.
Buckingham
Replacement Velcro lower straps for a quick, even fit on your climbing spurs.
Notch
Quick-connect ankle straps for getting in and out of Gecko spurs fast.
Weaver
Synthetic ankle straps that shrug off wet and keep spurs tight to your boot.
Yale Cordage
Slick, low-stretch throw line for clean, high shots into the canopy.
Gap Arborist Supply
High-visibility, budget-friendly throw line for everyday line setting.
Notch
A tough, bright throw weight for setting line in big and small trees.
Weaver
A mid-weight throw bag that handles most everyday line-setting.
Weaver
A heavier throw bag that pushes through dense canopy and pulls line down.
Weaver
A streamlined throw weight that slips through tight spots round bags snag on.
Arbortec
A chainsaw-protective arborist boot built for climbing and ground work.
Arbpro
Arborist work boots built for climbing, spurring and long days on the job.
Wesco
Handmade 10 inch lineman-style boots built to stand on spurs all day.
Wesco
Black 10 inch handmade Wesco boots built for spurs and long climbs.
Arbortec
A black and lime Arbortec ball cap for off-climb hours and shop days.
Arborwear
A breathable mesh-back trucker cap with Arborwear's A-Tree logo.
Arborwear
A vintage-style Climb Trees trucker cap for climbers off the rope.
Arborwear
A black and charcoal trucker cap with Arborwear's embroidered logo.
Gap Arborist Supply
A breathable black mesh trucker cap for ground work, travel days and the shop.
Arborwear
Arborwear's two-layer heavyweight hoodie in a bright orange, size large.
Gap Arborist Supply
High-visibility vest for crews working near fast traffic or in low light.
Arbortec
A tough webbing trouser belt that sits flat under a climbing saddle.
Arborwear
Stretch climbing pants in a light driftwood tone for long days aloft.
Arborwear
Arborwear's tree work pant in a dark coal color that hides the dirt.
Arborwear
Arborwear's tree work pant in a light driftwood tan for sunny jobs.
Arborwear
Arborwear's heavy canvas climbing pant in a warm chestnut brown.
Clogger
Clogger's Spider arborist pant in contrast color, made for tree crews who move a lot.
Clogger
Clogger's Spider arborist pant in gray, made for tree crews who move a lot.
Edelrid
A slim, quick-adjust webbing trouser belt from Edelrid in a dark night color.
Teufelberger
Lightweight climbing pants from Teufelberger for warm days and long climbs.
Pfanner
Bluetooth headset add-on for Protos Integral helmets, for climber-to-ground talk.
Fanno
A 17-inch tri-edge replacement blade for pruning pole saws.
Jameson
A 16-inch tri-cut replacement blade for Jameson pole saw heads.
Jameson
A replacement 13-inch blade for the HS-13TE-LPS pruning hand saw.
Silky
Fresh straight blade for the Silky Gomtaro Pro Sentei pruning saw.
Silky
A 390 mm extra-large-tooth blade for the Silky Hayate telescoping pole saw.
Silky
Replacement sickle blade for the Silky Hayate pole system, for vines and small shoots.
Silky
Fresh blade for the Silky Pocketboy folding pruning saw.
Fanno
A US-made 13-inch pruning saw with a traditional wooden handle.
Jameson
A compact 11-inch straight pruning saw for small cuts and tight spaces.
Jameson
A full-size 13-inch pruning saw with a shaped grip for long days.
Jameson
A 13-inch pruning saw with a classic wooden grip.
Silky
A pocket-size Silky folding saw with a 130 mm blade and large teeth.
Silky
Silky's popular straight 300 mm pruning saw, sold with a scabbard.
Silky
A curved Silky pruning saw with medium teeth for clean, quick cuts.
Silky
Silky's 13-inch curved Zubat set up for climbers with an arborist scabbard.
Gap Arborist Supply
A 12-inch non-metallic link for the pull rope on a pole pruner.
Gap Arborist Supply
A 16-foot, three-section aluminum telescoping pole saw for ground pruning.
Gap Arborist Supply
Replacement female pole ferrule with a spring-clip lock for sectional poles.
Jameson
A small replacement link that keeps a Jameson pole pruner head cutting cleanly.
Jameson
A fresh return spring for the Jameson Big Mouth pole pruner head.
Jameson
Replacement return spring for Jameson heavy duty pole pruner heads.
Jameson
Replacement lower bolts that hold the blade tight on a Jameson pole saw head.
Gap Arborist Supply
A replacement male joint fitting for sectional pruning and pole saw poles.
Marvin
Replacement fastener set for Marvin pole pruner and saw heads.
Marvin
A replacement butt cap that seals and protects the bottom end of a Marvin pole.
Marvin
The fitting that joins a Marvin pole pruner head to the top of the pole.
Marvin
The fitting that holds a Marvin pole saw head square on the pole.
Silky
Elastic thigh straps that keep a long Silky scabbard from swinging.
Phoenix
A pole saw head that turns a sectional pole into an overhead pruning saw.
Silky
Run a Silky pole saw blade on a standard sectional pole.
Weaver
A blade cover for 13 inch hook tip pole saw blades.
Weaver
A blade cover sized for 16 inch pole saw blades.
Weaver
A rubberized hand saw scabbard with a built-in pouch for hand pruners.
Jameson
Six foot fiberglass pole sections for building Jameson pole saw and pruner kits.
Jameson
Eight foot B-Lite fiberglass pole sections for Jameson pole tool kits.
Jameson
A foam-core base section that anchors a Jameson sectional pole kit.
Husqvarna
A straightforward bypass hand pruner for clean cuts on small stems.
Jameson
A ready-to-work pole pruner kit built around Jameson's wide-jaw Big Mouth head.
Jameson
A wide-jaw pole pruner head with pulley leverage for bigger overhead cuts.
Jameson
The wide-jaw Big Mouth pole pruner, set up for Jameson's CompositLock poles.
Jameson
A complete pulley pole pruner head with adapter and rope, ready to mount.
Marvin
Marvin's heavy-duty pole pruner head, supplied with the pole adapter.
Marvin
A classic Marvin pole pruner head supplied with its pole adapter.
Gap Arborist Supply
Replacement braided polyester pull cord for pole pruners.
ART
A mechanical friction hitch for moving rope systems from ART.
ISC
A replacement flexible tether for the ISC Chipmunk in SRS setups.
Vertec
A mechanical friction device for stationary rope tree climbing.
CAMP
A European-style bridge saddle from CAMP for full-day tree work.
Catalyst
A European-style bridge saddle for climbers who spend long days on rope.
DMM
DMM's pro-level bridge saddle for climbers who want light weight and free movement.
R-Easy Climbing
A fabric European-style tree climbing saddle for working arborists.
R-Easy Climbing
The leather version of the Fox European-style tree climbing saddle.
Teufelberger
A pared-back treeMOTION bridge saddle for climbers who want the core design.
Beeline
An 8 mm black eye-to-eye hitch cord for friction hitches on climbing lines.
Courant
An 8 mm sewn eye-to-eye hitch cord from Courant in Pink Dragon color.
Gap Arborist Supply
A versatile sling with a ring for anchors, redirects, and false crotches.
Samson
A sewn eye-to-eye hitch cord from Samson for friction-hitch climbing.
Sterling
Sterling's supple 8 mm hitch cord with sewn eyes for friction-hitch climbing.
Sterling
Sterling's durable 8 mm hitch cord with sewn eyes for friction hitches.
Yale Cordage
An 8 mm sewn eye-to-eye hitch cord from Yale Cordage.
FS-FLEX
A full-body fall protection harness with hip D-rings for bucket and lift work.
Safewaze
A nylon full-body fall arrest harness built for work near electrical hazards.
Gap Arborist Supply
A bagged emergency descent kit for bucket truck and aerial lift crews.
Husqvarna
Husqvarna's biodegradable bar and chain oil for saws working near soil and water.
CAMP
A foot ascender system from CAMP for faster rope ascents on SRS.
Ocean
A polyester prusik loop for footlocking up a doubled climbing line.
Gap Arborist Supply
A dedicated climber tie-in for crane-assisted tree removals.
CAMP
A cambium saver from CAMP that protects the tree and your climbing line.
CMI
A ring-and-ring friction saver from CMI with light aluminum rings.
Gap Arborist Supply
A straightforward friction saver for protecting bark and rope at the tie-in.
CAMP
A 45-liter gear bag from CAMP for hauling climbing kit to the job.
DMM
DMM's 45-liter gear bag for moving climbing and rigging kit.
Notch
A Notch gear bag for keeping climbing kit organized and easy to reach.
Petzl
Petzl's 45-liter haul pack for climbing and rope work gear.
Fanno
A 15-inch curved pull-stroke pruning saw for climbers and ground crews.
3M
Over-the-head hearing protection from 3M Peltor for ground crews.
Husqvarna
Helmet-mounted hearing protection from Husqvarna for saw operators.
Gap Arborist Supply
Heavy spliced bull rope sling for setting blocks and choking big wood on removals.
Samson Rope
Single-eye Tenex-TEC sling for choking spars and hanging blocks on heavy removals.
Gap Arborist Supply
Mid-weight spliced bull rope sling for daily blocking and limb rigging.
Tylaska
Dead-eye rigging sling paired with Tylaska low-friction hardware for redirects.
LAND
Vented climbing-style helmet for climbers who want airflow on hot days aloft.
LAND
Non-vented Class E, Type 2 helmet for line clearance and general tree crew work.
LIFT Safety
Fresh comfort pads for the LIFT Radix helmet when the old ones are flat or worn.
LIFT Safety
Replacement suspension for the LIFT Radix when the harness is worn or damaged.
Pfanner
Clip-on neck cover for the Protos helmet that blocks sun, chips and rain.
Gap Arborist Supply
Hook-on step for getting in and out of a bucket or truck bed safely.
Weaver
Fitted cover that keeps rain and debris out of a one-man aerial bucket.
AE
Rigid fiberglass scabbard that mounts inside the bucket to hold a saw secure.
SafeTree Products
Outside-mount saw scabbard that keeps the bucket interior clear for the operator.
SafeTree Products
Saw scabbard sized for aerial lift baskets and buckets.
Husqvarna
Pro replacement bar in 3/8 pitch, .050 gauge for mid to large Husqvarna saws.
Husqvarna
Heavy-duty sprocket nose bar for big saws running .404 pitch chain.
Husqvarna
Narrow kerf X-Force bar for Husqvarna's Pixel chain on mid-size saws.
Husqvarna
Low-profile 3/8 mini chain for small saws, top handles and pruning work.
Husqvarna
Heavy .404 pitch chain in .063 gauge for big saws on large wood.
Husqvarna
Bar cover that protects the chain, your hands and the truck in transport.
Arbortec
Light, breathable stretch chainsaw pants for climbers and ground workers.
Arbortec
Light, breathable stretch chainsaw pants for climbers and ground workers.
Husqvarna
Bulk ready-mixed 2-stroke fuel for crews running a fleet of saws and handhelds.
Gap Arborist Supply
Bright, hard plastic wedge for lifting trees and freeing pinched bars.
Husqvarna
Simple jointer that sets raker height on 3/8 pitch chain.
Husqvarna
Field vise you tap into a stump to hold the saw steady for filing.
Pferd
2-in-1 guide that files cutter and raker together in a single stroke.
Timber Savage
Flat file for lowering rakers and cleaning up bar rails.
Timber Savage
Round files for sharpening chainsaw cutters, sized by chain pitch.
Gap Arborist Supply
Replacement chipper knife sized 9 x 5.5 x 5/8 in for brush chippers.
Gap Arborist Supply
Long-handled 5-tine fork for chips, mulch and brush cleanup.
Gap Arborist Supply
A stiff steel-head rake for chip cleanup, mulch, and finish raking on tree jobs.
Hasegawa
A tripod orchard ladder with a flat platform top for steady pruning work.
Husqvarna
A belt-worn, self-retracting tape for measuring log lengths solo.
Spencer
A replacement 75 ft blade for a Spencer diameter tape case.
Spencer
A 50 ft belt-clip logging tape with a nail end for one-person bucking.
Spencer
A replacement end nail that keeps your Spencer logging tape in service.
LogRite
An add-on stand that turns a LogRite tool into a log lifter for clean bucking.
Husqvarna
A professional rear-handle battery saw for ground work, limbing, and quiet jobs.
Husqvarna
A 36V pro battery pack for Husqvarna saws, blowers, and trimmers.
Husqvarna
A large-capacity 36V pack for long ground runs on Husqvarna tools.
Husqvarna
A pro-grade gas handheld blower for fast jobsite cleanup.
Husqvarna
An 88 cc big-wood saw for felling and bucking large trees.
Husqvarna
A gas pole saw on a dielectric shaft for long-reach limb removal.
Husqvarna
A replacement 3/8 in pitch, 7-tooth clutch drum for the 562XP.
Gap Arborist Supply
A .325 pitch, 7-tooth replacement rim sprocket for mid-size saws.
Gap Arborist Supply
A .325 pitch, 7-tooth spur-style drive sprocket for chainsaws.
Echo
A replacement air filter for the Echo CS-2511T, the popular lightweight top-handle saw.
Husqvarna
A replacement air filter for the Husqvarna 562XP, a mid-size workhorse saw.
Husqvarna
A replacement air filter for the Husqvarna T435, a light top-handle saw for pruning.
Husqvarna
A replacement air filter for the Husqvarna 390XP, the big-wood felling saw.
Husqvarna
A replacement air filter for the Husqvarna T540XP Mark II, a pro climbing saw.
Husqvarna
A replacement air filter for the Husqvarna 3120XP, the largest Husqvarna big-wood saw.
Husqvarna
A replacement AV element that restores the 372XP's vibration damping.
Husqvarna
A replacement AV element that restores the 395XP's vibration damping.
Husqvarna
A replacement AV element that restores the 562XP's vibration damping.
Husqvarna
A replacement AV element that restores the 572XP's vibration damping.
Husqvarna
A replacement AV element that restores the 592XP's vibration damping.
Husqvarna
A replacement AV element that restores the 592XP's vibration damping.
Husqvarna
A replacement carburetor assembly for the T540XP Mark II top-handle saw.
Husqvarna
A replacement keypad and control panel for the T540iXP battery saw.
Husqvarna
A replacement coupling for the 395XP chain tensioner.
Husqvarna
Replacement top cover for the Husqvarna 550XP Mark II, for cracked or lost covers.
Husqvarna
Base gasket for the Husqvarna 390XP cylinder, for top-end rebuilds and repairs.
Husqvarna
Cylinder base gasket for the Husqvarna 572XP, needed for any top-end job.
Husqvarna
Replacement decompression valve that makes the 372XP X-Torque easier to start.
Husqvarna
Replacement front handlebar assembly for a bent or damaged Husqvarna 572XP.
Husqvarna
Replacement front handle for the Husqvarna T540i XP battery top-handle saw.
Husqvarna
In-tank fuel filter for the Husqvarna 3120XP big-bore chainsaw.
Husqvarna
In-tank fuel filter for Husqvarna 545, 550XP and 562XP chainsaws.
Husqvarna
Replacement fuel line for the Husqvarna 562XP chainsaw.
Husqvarna
Replacement fuel or bar oil tank cap for the Husqvarna T540XP Mark II top-handle saw.
Husqvarna
Replacement fuel or bar oil cap assembly for Husqvarna chainsaws.
Husqvarna
O-ring for the clutch side crankshaft seal on the Husqvarna 372XP.
Husqvarna
Replacement stop switch for the Husqvarna 395XP big-bore chainsaw.
Husqvarna
Replacement ignition coil and module for the Husqvarna 572XP chainsaw.
Husqvarna
Ignition module assembly listed as the MP version for the Husqvarna 572XP.
Husqvarna
Front anti-vibration element for the Husqvarna 592XP big-bore chainsaw.
Husqvarna
Replacement air filter cover for the Husqvarna T540i XP battery top-handle saw.
Husqvarna
Anti-vibration element assembly for the Husqvarna 550XP Mark II.
Husqvarna
Replacement anti-vibration element for the Husqvarna 572XP.
Husqvarna
Replacement nut that holds the bar and clutch cover on Husqvarna chainsaws.
Husqvarna
Replacement bearings for the Husqvarna T540XP Mark II top-handle saw.
Husqvarna
Pivot bushing for the chain brake hand guard on Husqvarna chainsaws.
Husqvarna
Replacement chain brake hand guard for the Husqvarna T540i XP.
Husqvarna
Replacement starter cord for Husqvarna chainsaw recoil starters.
Husqvarna
Choke and stop control part for the Husqvarna 562XP chainsaw.
Husqvarna
Replacement centrifugal clutch for the Husqvarna 562XP chainsaw.
Husqvarna
Replacement motor cooling fan for the Husqvarna T540i XP battery saw.
Husqvarna
OEM cylinder and piston kit for rebuilding the top end of a Husqvarna 372XP.
Husqvarna
OEM cylinder assembly for rebuilding the top end of a Husqvarna 572XP.
Husqvarna
Replacement top cover assembly for the Husqvarna T540XP top-handle saw.
Husqvarna
The push-button valve that makes a 94 cc 395XP pull over without wrecking your shoulder.
Husqvarna
Fresh fuel line for the T435 top-handle when the old hose cracks, swells or leaks.
Husqvarna
Replacement tank cap for Husqvarna saws when the seal leaks or the cap goes missing.
Husqvarna
The intake boot between carb and cylinder on the 550XP Mark II. Air leak here kills saws.
Husqvarna
Intake boot for the original 550XP. Stops air leaks that make the saw run lean.
Husqvarna
Chain brake linkage part for the 562XP. A brake that doesn't set right is not optional.
Husqvarna
The small safety switch that tells the T540iXP it is safe to run.
Husqvarna
A new pull grip for Husqvarna recoil starters. Cheap, and you'll want a spare.
Husqvarna
Replacement sprocket nose that puts a worn PowerMatch bar back to work.
Husqvarna
A 3/8-pitch sprocket nose for Husqvarna bars built to take a replaceable nose.
Husqvarna
A replacement screw for the drive side of the T540iXP battery top-handle.
Husqvarna
The screw that holds the 395XP muffler support. Lose it and things shake loose.
Husqvarna
The screw that holds a Husqvarna AV spring or buffer in place.
Husqvarna
The screw that holds the handguard to the brake mechanism on Husqvarna saws.
Husqvarna
A replacement Husqvarna fastener. Confirm the location and size on your parts diagram.
Husqvarna
Clutch-side crank seal for the 372XP X-Torque. Keeps the crankcase airtight.
Husqvarna
Starter recoil spring cassette for the 592XP. Rope won't rewind, this is likely why.
Husqvarna
Complete recoil starter for the 460 Rancher. Bolt it on and pull.
Husqvarna
A complete recoil starter for the T540XP gas top-handle saw.
Husqvarna
Pawls and springs for the 572XP starter, for a rope that pulls but won't turn the engine.
Husqvarna
The rope pulley inside the 592XP starter. Cracked pulley, chewed rope, no start.
Husqvarna
Fresh starter rope for the 550XP Mark II. Swap it before it snaps.
Husqvarna
Replacement flywheel-side housing half for the T540iXP battery top-handle saw.
Husqvarna
Replacement bar-side housing half for the T540iXP battery top-handle saw.
Husqvarna
Replacement trigger for the T540iXP. Smooth throttle and a lockout that works.
Husqvarna
The worm gear that drives the oil pump on the 550XP Mark II.
Husqvarna
The worm gear that drives the bar oil pump on the 562XP.
Husqvarna
The inner bumper spike for the 572XP. Grip and pivot point for big cuts.
Husqvarna
A replacement muffler for the 562XP when the old one cracks or rattles.
Husqvarna
The muffler gasket for the 372XP X-Torque. Fit a new one every time the muffler comes off.
Gap Arborist Supply
A needle bearing for 3/8 pitch clutch drums. Replace it when you replace the drum.
Husqvarna
Replacement bar-oil pump for the Husqvarna 395XP when the bar runs dry.
Husqvarna
Replacement bar-oil pump for the Husqvarna 550XP Mark II ground saw.
Husqvarna
Replacement outer bucking spike for the Husqvarna 572XP.
Husqvarna
Replacement pull grip for Husqvarna 500 series chainsaw starters.
Husqvarna
Replacement muffler mounting screw for the Husqvarna 395XP.
Husqvarna
Replaceable nose sprocket that brings a worn Husqvarna light bar back to life.
Husqvarna
Replacement ignition stop switch for the Husqvarna 372XP.
Husqvarna
Replacement recoil starter rope for the Husqvarna 395XP.
Husqvarna
Replacement flywheel pawls and springs for the 550XP Mark II starter.
Husqvarna
Replacement flywheel pawl for Husqvarna chainsaw recoil starters.
Gap Arborist Supply
Replacement carbide teeth for stump grinders set up with 1100-series pockets.
Gap Arborist Supply
Replacement carbide teeth for grinders set up with 700-series pockets.
Green Manufacturing
Replacement spacer for Green Teeth 900-series cutter wheel setups.
Gap Arborist Supply
Replacement bolt for low-profile stump grinder tooth systems.
Gap Arborist Supply
Replacement pocket that holds standard teeth on a stump grinder wheel.
TreeHog
Portable mesh screens that help contain debris thrown by a stump grinder.
Husqvarna
4-gallon manual backpack sprayer for spot treatments and plant health work.
Husqvarna
Compact 48 oz pump sprayer for small spot treatments.
Husqvarna
14-inch replacement metal blade for compatible Husqvarna tools.
Husqvarna
Steel felling lever with a turning hook for felling help and rolling logs.
Jameson
48-inch non-conductive probe for checking soil and buried obstructions.
Jameson
Nylon twin-prong pole head for pulling vines and lifting lines from the ground.
CAMP
Single-leg sewn lanyard with a swivel connection to reduce twisting.
DMM
Adjustable DMM lanyard for positioning and work at height, ZUU7 version.
LogRite
Log arch with wide tires for moving logs out of yards and woods.
CMI
Friction device that helps the ground crew control loads on a rigging line.
DMM
Compact pulley with an extra attachment point for climbing and MA systems.
R-Easy
Pulley designed to make adjusting a climbing lanyard smoother.
Gap Arborist Supply
Sewn nylon webbing loops for anchors, redirects, and gear organization.
Corona
A small replacement spring that brings a weak Corona pole clip back to a firm snap.
Husqvarna
Common wear parts in one pack for tuning up a Husqvarna 135, 435 or 440.
Husqvarna
Replacement drive-side cover for the Husqvarna T540i XP battery top-handle saw.
Husqvarna
Front hand guard for the Husqvarna 562XP, a key part of the chain brake.
Husqvarna
Recoil starter pulley for the Husqvarna 562XP Mark II.
Husqvarna
Pre-wound recoil spring in a cassette for Husqvarna chainsaw starters.
Westcoast Saw
Aftermarket replacement clutch cover for Husqvarna saws from Westcoast Saw.
Westcoast Saw
Three-point bucking spikes for Husqvarna saws, for more bite when felling and bucking.
Westcoast Saw
Three-point bucking spikes for Stihl saws, for a steady pivot on big cuts.
Westcoast Saw
Replacement muffler for the Echo CS-2511T, the small top-handle many climbers carry.
Westcoast Saw
Replacement muffler for the Stihl MS 201 T top-handle climbing saw.
Westcoast Saw
Replacement muffler for the gas Husqvarna T540 XP Mark III top-handle.
Gap Arborist Supply
Ship auger bit for drilling clean holes for tree cabling and bracing hardware.
Gap Arborist Supply
Ship auger bit for drilling clean holes for tree cabling and bracing hardware.
Gap Arborist Supply
Ship auger bit for drilling clean holes for tree cabling and bracing hardware.
Gap Arborist Supply
Ship auger bit for drilling clean holes for tree cabling and bracing hardware.
Klein Tools
Cable grip that clamps steel strand so you can pull it tight before terminating.
HIT
Hand cable cutter for clean cuts on steel strand during tree cabling jobs.
Preformed Line Products
Drill attachment for driving lag-type cabling hardware into the tree.
Weaver
Nylon basket to carry tree cable and hardware up the tree.
Gap Arborist Supply
A 1/2 in. turnbuckle for fine tension adjustment in guying and support systems.
Gap Arborist Supply
A 5/8 in. eye bolt anchor for through-bolted tree cabling systems.
Gap Arborist Supply
A forged eye nut that turns threaded rod into a cable anchor point.
Gap Arborist Supply
Galvanized washers to seat nuts and eyes on through-bolted cabling hardware.
Preformed Line Products
Helical dead-ends for fast, clean termination of steel support cable.
Rig Guy
Beveled washer that seats cabling hardware evenly on a rounded stem.
Rig Guy
Caps that finish off cable ends and hardware on a tree cabling install.
Rig Guy
Stop fitting that holds the wire at the hub in a Rig Guy cabling system.
Duckbill
Steel drive rod for setting the larger Duckbill earth anchors when guying trees.
Corona
Rope-operated pole pruner head for cutting overhead limbs from the ground.
Corona
Hand bypass pruner with 1 in. capacity for clean cuts on live wood.
DMM
A compact DMM pulley paired with a prusik loop for hitch tending and small haul systems.
Sirius
An 8 mm sewn-style prusik loop with an aluminum ring for hitch and adjuster setups.
Yale Cordage
Yale's heat-resistant 8 mm Bee Line hitch cord in a ready loop with an aluminum ring.
Edelrid
Replacement upper cuffs and straps for Edelrid Talon climbing spurs.
Gap Arborist Supply
A speedline setup for sending brush down a tensioned rope to a clear drop zone.
Husky
A 1/2 in double braid bull rope for light rigging, limb lowering, and pruning work.
Husky
A 3/4 in double braid bull rope for heavy wood and big removal work.
Husky
A 5/8 in double braid bull rope for general removal rigging and mid-size wood.
Mammoth
A 5/8 in rigging line for everyday lowering on tree removals.
Sterling Rope
A 3/4 in x 200 ft rigging line from Sterling for heavy removal work.
Teufelberger
A 1/2 in x 150 ft Teufelberger rigging line for light lowering work.
CMI
A rigging block sized for 1/2 in rope for light lowering work.
CMI
CMI's arborist rigging block for redirecting lowering lines on removals.
ISC
A mid-size ISC rigging block for 5/8 in rope on everyday removals.
ISC
A compact ISC rigging pulley for 5/8 in rope.
ISC
ISC's large rigging pulley for heavy rope up to 25 mm on big removals.
ISC
A 150 kN ISC rigging pulley for rope up to 20 mm.
ISC
A compact ISC rigging pulley for 1/2 in rope and light lowering.
DMM
A compact DMM rigging plate for organizing connectors at an anchor.
Petzl
A medium Petzl rigging plate for building clean multi-point anchors.
CMI
A compact 2 in CMI pulley for hauling and light rope systems.
CMI
A tough stainless steel pulley for 5/8 in rope on hard-working rope systems.
Gap Arborist Supply
A large aluminum single pulley rated 70 kN with a bushing sheave.
Rock Exotica
A swiveling double-sheave pulley for compact mechanical advantage systems.
Rock Exotica
A swiveling single pulley with a 2.6 in sheave for efficient rope work.
AMH
A hook with a wide saddle shaped for round slings in lifting and rigging.
Buckingham
A compact Port-A-Wrap for lowering light limbs and small wood.
Gap Arborist Supply
A friction lowering device for light rigging loads up to 120 kg.
Stein
A trunk-mounted Stein rigging winch for controlled lowering and lifting.
Stein
Winch parts for the Stein RCW 3001, for crews that lower and pull with one device.
Gap Arborist Supply
A rope-and-block pulling system with 120 ft of line, rigged and ready for the truck.
Gap Arborist Supply
A rope-and-block pulling system with 150 ft of line, rigged and ready for the truck.
Gap Arborist Supply
A rope-and-block pulling system with 75 ft of line, rigged and ready for the truck.
Gap Arborist Supply
A pair of fiddle blocks without rope, for crews who want to choose their own line.
Maasdam
Service parts to bring a worn Maasdam rope puller back into work.
Petzl
A compact double pulley with becket for building light haul systems.
CMI
Hardware to set up a speedline and send brush and wood to a clear drop zone.
ISC
An ISC rigging block for 1/2 inch line, with a sling to hang it.
ISC
A light aluminum rigging block for 5/8 inch line with a matching dead-eye sling.
Buckingham
A friction lowering device and an adjustable 5/8 inch whoopie sling to mount it.
Gap Arborist Supply
A 1/2 in. soft sling for anchoring lowering devices and blocks without hardware.
Gap Arborist Supply
A 3/4 in. soft sling for anchoring lowering devices and blocks without hardware.
Gap Arborist Supply
An adjustable whoopie sling with an XL ring for a smooth rigging point.
Gap Arborist Supply
An adjustable 3/8 in. loop sling that sets from about 2 to 4 ft.
Gap Arborist Supply
An adjustable 5/8 in. loop sling that sets from about 2 to 8 ft.
Gap Arborist Supply
A 5/8 in. soft sling for anchoring lowering devices and blocks without hardware.
Gap Arborist Supply
An adjustable sling with two XL rings for redirects and friction rigging.
Gap Arborist Supply
A 3/4 in. soft anchor sling with two XL rings for friction rigging points.
Gap Arborist Supply
A 7/8 in. soft anchor sling with two XL rings for friction rigging points.
Gap Arborist Supply
A flat 2 inch webbing sling with an eye at each end for picks and chokes.
Gap Arborist Supply
A 20 ft, 5/8 inch rope sling for choking picks on crane removals.
Gap Arborist Supply
A 30 ft, 5/8 inch rope sling for choking picks on crane removals.
Gap Arborist Supply
A multi-leg 1/2 in. sling for balancing picks and lowering wood level.
Gap Arborist Supply
A 1/2 inch dead-eye sling made from Samson Tenex-TEC rope.
Gap Arborist Supply
A multi-leg 3/8 in. sling for balancing picks and lowering wood level.
Gap Arborist Supply
A 5/8 inch 12-strand dead-eye sling for hanging rigging blocks.
Gap Arborist Supply
A long 3/4 inch dead-eye sling with a ring for big-stem rigging points.
Gap Arborist Supply
A dead-eye sling with a large Beast ring for heavy friction rigging.
Gap Arborist Supply
A 3/4 in. ring sling you can set and retrieve from the ground.
Gap Arborist Supply
A 9/16 in. ring sling you can set and retrieve from the ground.
Gap Arborist Supply
A 1/2 rope sling with a thimble eye and 28mm ring for natural-crotch and spar rigging.
Gap Arborist Supply
A 3/4 rope sling with a thimble eye and 28mm ring for natural-crotch and spar rigging.
Gap Arborist Supply
Heavy 5/8 in bull rope sling with a thimble and big ring for real wood.
Gap Arborist Supply
A long 5/8 in sling with an eye at each end for big stems and heavy blocks.
Tylaska
A machined Tylaska friction block for building clean, low-wear rigging points.
Tylaska
The LFB-20 size of Tylaska's Basilisk low-friction device for rigging and redirects.
Tylaska
The LFB-28 size of Tylaska's Basilisk low-friction device for rigging and redirects.
Tylaska
The compact Basilisk size for light rigging, redirects, and small lowering setups.
Tylaska
A machined low-friction ring for rigging points, redirects, and lowering lines.
DMM
Machined DMM rings for friction savers, anchors, and custom climbing setups.
All Gear
A tough rope bag for keeping climbing and rigging lines clean between jobs.
DMM
A 30 liter DMM rope bag for carrying and deploying climbing line.
DMM
A 45 liter DMM rope bag for carrying and deploying climbing line.
Gap Arborist Supply
A big, tough bag for thick rigging rope on removal jobs.
Gap Arborist Supply
A deep-sided thimble that keeps rope seated in a spliced eye.
Gap Arborist Supply
A replacement rope lanyard for climbers swapping out a worn line.
All Gear
A replacement positioning lanyard in All Gear's Blue Craze rope.
Yale Cordage
A Yale Cordage replacement positioning lanyard in green and black.
Yale Cordage
A Yale Phantom positioning lanyard in green and purple with a double-locking snap.
Yale Cordage
A Yale Phantom positioning lanyard in pink and black with a double-locking snap.
Samson Rope
Samson's classic 12-strand arborist climbing line in 1/2 in.
Yale Cordage
A Yale Cordage 12-strand climbing rope for everyday tree work.
Yale Cordage
Yale's 16-strand XTC Plus climbing line for traditional hitch climbing.
Yale Cordage
A 16-strand Yale XTC climbing line in a bright spearmint colorway.
All Gear
An 11.8mm 24-strand All Gear climbing line for SRS and MRS.
All Gear
An 11.8mm 24-strand All Gear climbing line for SRS and MRS.
All Gear
An 11.8mm 24-strand All Gear climbing line for SRS and MRS.
Samson Rope
A Samson climbing line in the HyperClimb range, in a cool-toned color.
Samson Rope
A smaller-diameter 11mm Samson climbing rope in a cool-toned colorway.
Samson Rope
A smaller-diameter 11mm Samson climbing rope in a hot, high-visibility colorway.
Samson Rope
An 11.8mm Samson climbing line for SRS and MRS work.
Teufelberger
Teufelberger climbing line for tree climbing on a hitch or device.
Teufelberger
Teufelberger climbing line for tree climbing on a hitch or device.
Teufelberger
Teufelberger climbing line for tree climbing on a hitch or device.
Teufelberger
Teufelberger climbing line for tree climbing on a hitch or device.
Yale Cordage
Yale Cordage climbing line for tree climbing on a hitch or device.
Yale Cordage
Yale Cordage climbing line for tree climbing on a hitch or device.
Yale Cordage
Yale Cordage climbing line for tree climbing on a hitch or device.
Yale Cordage
Yale Cordage climbing line for tree climbing on a hitch or device.
Yale Cordage
Yale Cordage low-stretch static rope for SRS climbing and access lines.
Yale Cordage
Yale Cordage low-stretch static rope for SRS climbing and access lines.
Yale Cordage
Yale Cordage climbing line for tree climbing on a hitch or device.
Courant
Courant low-stretch static rope for SRS climbing and access lines.
Petzl
Petzl low-stretch static rope for SRS climbing and access lines.
Sterling Rope
Sterling Rope low-stretch static rope for SRS climbing and access lines.
Teufelberger
Teufelberger low-stretch static rope for SRS climbing and access lines.
Teufelberger
Teufelberger low-stretch static rope for SRS climbing and access lines.
Teufelberger
Teufelberger low-stretch static rope for SRS climbing and access lines.
Teufelberger
Teufelberger low-stretch static rope for SRS climbing and access lines.
Yale Cordage
Yale Cordage low-stretch static rope for SRS climbing and access lines.
Yale Cordage
Yale Cordage low-stretch static rope for SRS climbing and access lines.
Sterling Rope
Sterling Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope splicing rope for splicing slings, loopies and tails.
Yale Cordage
Yale Cordage rigging rope for lowering wood on removals.
Yale Cordage
Yale Cordage rigging rope for lowering wood on removals.
Samson Rope
Samson Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope rigging rope for lowering wood on removals.
Samson Rope
Samson Rope splicing rope for splicing slings, loopies and tails.
Sterling Rope
Sterling Rope rigging rope for lowering wood on removals.
Sterling Rope
A 3/4 in rigging line for crews lowering heavy wood on removals.
Teufelberger
A 12mm Teufelberger rigging line for lowering wood on pruning and removal jobs.
Teufelberger
A 14mm Teufelberger rigging line for lowering wood on pruning and removal jobs.
Teufelberger
A 16mm Teufelberger rigging line for lowering wood on pruning and removal jobs.
Yale Cordage
A 3/4 in polyester double braid rigging line from Yale Cordage.
Yale Cordage
A 5/8 in polyester double braid rigging line from Yale Cordage.
Yale Cordage
A 10mm hitch cord by the foot for climbers who tie their own friction hitches.
Sterling Rope
A 9mm Sterling cord by the foot for building your own friction hitch.
Teufelberger
Teufelberger accessory cord by the foot for prusiks, tethers, and utility jobs.
Yale Cordage
Yale's 8mm Bee Line hitch cord, cut to length for your friction hitch.
Yale Cordage
A 5/16 in Ultrex synthetic winch line with a Chook end, ready to spool.
Yale Cordage
A 3/8 in Ultrex synthetic winch line with a Chook end, ready to spool.
Yale Cordage
A Yale Cordage end fitting for synthetic winch lines like Ultrex.
Yale Cordage
Bulk 1/2 in Ultrex synthetic line, cut to length for your winch or pulling setup.
Yale Cordage
Bulk 3/4 in Ultrex synthetic line, cut to length for your winch or pulling setup.
Yale Cordage
Bulk 5/16 in Ultrex synthetic line, cut to length for your winch or pulling setup.
Husqvarna
A small 4 in wedge that rides on your saddle for cuts up in the tree.
Reecoil
A hydration harness that keeps water on you through a long climb.
Teufelberger
A replacement gear loop for treeMOTION saddles.
Tree Access
A replacement saddle bridge with a swivel to keep your system from twisting.
Notch Equipment
A saddle tool carrier that keeps hand tools hanging where you can reach them.
Shembiner
A saddle-mounted hook that gives your saw its own place to hang.
Sena
A replacement boom mic to get a Tufftalk Lite headset talking again.
Fox 40
A small retractable reel that keeps a whistle where you can reach it.
Sena
Helmet-mount earmuffs with Bluetooth intercom for climber-to-ground talk.
3M
A mesh face screen for hard hats that works with Peltor earmuffs.
3M
Light, snug clear safety glasses for everyday tree work.
ERB Safety
Low-cost clear safety glasses to keep a crew in eye protection.
ERB Safety
Low-cost smoke safety glasses to keep a crew in eye protection.
Husqvarna
Light wraparound safety glasses for saw work, chipping and cleanup.
Kask
Spare mounting parts to keep a Kask Super Plasma visor tight and working.
Kask
Adapter that lets you mount a mesh visor carrier on a Kask Super Plasma helmet.
Kask
Visor carrier for mounting a face screen on the Kask Zenith helmet.
Pfanner
Clear replacement visor for the Pfanner Protos integrated helmet.
Pfanner
Replacement mesh screen for the Pfanner Protos integrated helmet.
Gap Arborist Supply
A 6 ft wrap-around anchor strap for beams, poles and solid limbs.
Gap Arborist Supply
Rubber filler to bring a Fred rescue training dummy back up to weight.
Petzl
Mobile rope fall arrester with a locking function for backup on a second line.
Buckingham
Wearable bleeding control kit for chainsaw and climbing crews.
Weaver
Bright orange pouch for keeping first aid supplies on your saddle or belt.
3M
Peltor X-series earmuffs that clip into slotted helmets for saw and chipper work.
Kask
Green helmet-mounted ear defenders for Kask Super Plasma and Zenith helmets.
Kask
Higher-attenuation helmet ear defenders for Kask Super Plasma and Zenith.
3M
The highest-protection Optime muff, made to clip onto slotted helmets.
Pfanner
Fresh cushions to restore the seal on Pfanner Protos helmet ear muffs.
3M
Lightweight yellow Optime earmuffs that clip onto slotted helmets.
Gap Arborist Supply
A 1/2 in through-bolt anchor for tree cabling and support systems.
Gap Arborist Supply
Thin, slick throw line for setting climbing and rigging lines high in the canopy.
Gap Arborist Supply
Replacement 10.5 mm rope bridge for arborist climbing saddles.
Gap Arborist Supply
Add a prusik adjuster to a rope lanyard for quick positioning changes.
Gap Arborist Supply
A 12 oz throw weight with line, ready to set climbing and rigging lines.
Gap Arborist Supply
A 14 oz throw weight with line, ready to set climbing and rigging lines.
Gap Arborist Supply
A 16 oz throw weight with line, ready to set climbing and rigging lines.
Gap Arborist Supply
Light 5/16 in synthetic line for winching, pulling and tree work.
Gap Arborist Supply
Heavy 7/8 in rope sling with a spliced eye for big-wood rigging.
Sirius
8 mm hitch cord with thimble eyes for friction hitches on climbing or rigging lines.
Arbortec
Light, breathable chainsaw pants with all-round leg protection for climbers.
Arbortec
Stretch work jacket in brown Realtree camo for cool-weather climbing and ground work.
Arbortec
Orange Realtree camo stretch work jacket that stands out in the canopy.
Courant
Courant Phoenix 8 mm loop prusik with an aluminum ring for friction hitches.
Gap Arborist Supply
A soft, endless round sling for crane picks and heavy rigging points.
Husqvarna
A telescoping 36V pole saw for ground pruning, sold without battery or charger.
Husqvarna
A rope-pull bypass pruner head that mounts on a pole for clean cuts out of reach.
Husqvarna
A pole saw head that centers the blade on the pole for straighter cuts.
ISC
A four-action auto-locking offset oval with a captive pin to hold it in place.
Kask
A hi-viz climbing-style work helmet for arborists working near traffic and machines.
Notch
A fresh blade for your Notch Sentei saw when the old one is dull or bent.
Pferd
A file holder that squares up worn chainsaw bar rails so cuts run straight.
Yale Cordage
A fresh rope section for your Phantom adjustable friction saver.
Sterling Rope
A tough rope flipline with a locking snap for spar work and positioning.
The Splice Shop
A smooth aluminum ring for friction savers and custom climbing setups.
The Splice Shop
A 1/2 in rope ring sling with a thimble eye for spar and natural-crotch rigging.
Yale Cordage
A steel ring-to-ring friction saver on 16-strand rope for a protected tie-in.
Yale Cordage
An adjustable friction saver that fits small and large tie-in stems.
Gap Arborist Supply
A double locking snap for lanyard ends and flipline connections.
Teufelberger
A heat-resistant split tail for tying friction hitches on your climbing line.
Petzl
Fresh friction pins to keep a Chicane braking smoothly on a stationary rope.
Teufelberger
A static kernmantle climbing rope for arborists who climb SRS and MRS.
Yale Cordage
An 11mm static climbing line for arborists running SRS devices or hitches.
Notch
A portable debris guard that catches chips and rocks thrown by a stump grinder.
Sterling Rope
11mm Sterling TriTech cut to length for custom lanyards and fliplines.
Courant
A slick 1.8mm throwline for setting lines high in the canopy.
FTC
An 80m, 1.6mm stiff throw line in bright yellow for long, high throws.
Notch
A 2.2mm throw line that is easy to grip and strong enough for hauling lines.
Weaver
A Weaver tree-climbing harness for daily climbing and work positioning.
Gap Arborist Supply
A belt holster that keeps wedges and small tools within reach on the ground.
Husqvarna
A simple grip for round chainsaw files, for steadier and safer sharpening.
Gap Arborist Supply
A fresh flat file for your guide bar dresser.
Timber Savage
A cushioned handle for round chainsaw files and comfortable field sharpening.
Silky
A fresh 390mm curved blade to put a tired Hayauchi pole saw back on the job.
Petzl
A smooth, firm 11.6 mm tree climbing line built to pair with Petzl's mechanical prusiks.
Husqvarna
Helmet muffs with built-in crew talk, so climber and ground can hear each other.
Arbortec
Stretchy, vented chainsaw pants for climbers who hate wearing chaps over their gear.
Stein
Portable debris screens that fence in the chip spray when you grind near houses and cars.
Gap Arborist Supply
Slings, rings and hardware that anchor a single rope system at the base or canopy.
Gap Arborist Supply
The mechanical adjusters that let you shorten and lengthen a flipline with one hand.
Notch
A mechanical friction device for moving rope or SRT with fine descent control.
Samson
Firm, spliceable 3/8 in polyester line for light rigging, slings and tag lines.
Yale Cordage
8mm hitch cord by the foot for climbers who tie and splice their own split tails.
Husqvarna
A direct replacement muffler for the X-Torque version of the 372XP.
Gap Arborist Supply
Connects threaded-end tools to your pruning poles so one pole can run more heads.
Arb Climber
A print magazine made for tree climbers, about climbing gear, technique and the trade.
Samson
A hand-spliced 3/8 in Tenex eye-to-eye for rigging hitches and utility tie-ins.
Jameson
A 10 ft fiberglass pole section with a foam core for pole saws and pruner heads.
Gap Arborist Supply
A heavy-duty drag tarp for moving brush and debris across the lawn in one trip.
New England Ropes
Kernmantle utility cord by the foot for tethers, gear loops and tie-offs.
Buckingham
A heavy 20 oz throw bag for setting lines in big, tall or thick canopies.
Gap Arborist Supply
A tough forged steel ring for building ring slings, anchors and redirects.
Yale Cordage
Heavy 3/4 in rigging line for big removals and lowering large wood.
WestCoast Saw
A replacement clutch (sprocket) cover from WestCoast Saw for Stihl chainsaws.
Gap Arborist Supply
A dual-purpose lanyard that works as a flipline and a second point of attachment.
Husqvarna
Narrow-kerf .325 mini X-Cut chain for light, fast pro saws.
3M
New cushions and foam inserts to bring Optime 105 muffs back to a good seal.
Clogger
Light, stretchy chainsaw pants built for climbing arborists.
Gap Arborist Supply
Heavy 7/8 in adjustable anchor sling with an oversized ring for big rigging points.
Husqvarna
A replacement bumper spike for the 395XP to keep the saw pivoting cleanly in big wood.
Yale Cordage
Light, strong 5/8 in synthetic winch line to replace steel cable.
Gap Arborist Supply
Closed cord loops for friction hitches, backups and rigging grabs.
Petzl
A Petzl friction saver with a screwlink end for protecting rope and bark.
DMM
A DMM auto-locking carabiner for climbers who want a dependable gate on every clip.
International Society of Arboriculture
ISA's core study text for tree climbers, from first knots to modern climbing systems.
Husqvarna
A motorized rope ascender for long or repeated climbs. Battery sold separately.
CAMP
A knee-mounted ascent system for single rope climbers who want a smoother rope walk.
Husqvarna
A rope storage bag from Husqvarna for keeping line clean and tangle-free between jobs.
Freeworker
A European-style bridge harness for climbers who move a lot in the tree.
ISC
A rope wrench for SRS climbers who want a hitch that tends and descends smoothly.
Yale Cordage
Yale's 10mm Beeline hitch cord in black, cut to the length you need.
Husqvarna
A replacement recoil starter assembly for the Husqvarna T540XP Mark III top-handle saw.
All Gear
A synthetic tree cabling system for supplemental support of limbs and codominant stems.
Husqvarna
Replacement front hand guard and chain brake lever for the 550XP Mark II.
Rock Exotica
Swiveling Omni-Block 2.6 pulley with an adjustable loopie sling for quick rigging points.
ArbPro
Replacement laces for ArbPro Clip N Step and Evo climbing boots.
Husqvarna
Throw bags from Husqvarna for setting a throw line through a high crotch.
Yale Cordage
A 1/2 in rigging rope from Yale Cordage for limb lowering and light rigging.
Sena
A bump cap that carries a Sena SMH10 headset for hands-free crew communication.
PMI
A thick static rope lanyard for climbers who want a firm grip and long service life.
Husqvarna
A gas-powered commercial walk-behind mower for tree and landscape crews.
Gap Arborist Supply
Rope slings with a ring at one end for choking a stem and building a rigging point.
Estex
A fitted cover with a stiffening insert for 28 x 34 in one-man aerial lift buckets.
Husqvarna
A replacement clutch drum assembly to keep a 550XP Mark II cutting cleanly.
Buckingham
A Buckingham friction saver for protecting the tree and your climbing line at the tie-in.
Teufelberger
A lightweight adjustable lanyard kit from Teufelberger for everyday work positioning.
DMM
An oval auto-locking DMM carabiner with a gate built for the US market.
Husqvarna
A small-saw bar from Husqvarna sized for 3/8 in mini Pixel chain.
ISC
An ISC rigging block for 1/2 in rope, paired with an adjustable loopie sling.
Gap Arborist Supply
Replacement bolts for securing teeth and pockets on a stump grinder cutter wheel.
Yale Cordage
A positioning lanyard kit pairing Yale rope with the ART Positioner adjuster.
Husqvarna
A replacement chain oil pump for the Husqvarna 562XP.
Yale Cordage
A synthetic support system from Yale Cordage for limbs and codominant stems.
Husqvarna
Service parts for Husqvarna BLi200 packs, for crews keeping battery gear in the field.
Husqvarna
A 60-class residential zero-turn for crews and owners mowing large properties.
Husqvarna
Seasonal service parts for Husqvarna 525-series trimmers and brushcutters.
Sena
Wear parts for Sena crew headsets, so a torn cushion doesn't bench a radio.
Gap Arborist Supply
An adjustable rigging sling sized for big wood and heavy rigging points.
DMM
A compact DMM pulley and 8mm prusik loop for hitch tending and small rope systems.
Teufelberger
A heavy 7/8 in tREX sling for big rigging points on serious removals.
Climbing Technology
An auto-locking Climbing Technology carabiner for tree climbing systems.
Marvin
A heavy-duty pole pruner head with double-pulley leverage for thicker cuts.
Gap Arborist Supply
Yellow barricade tape for marking drop zones and keeping bystanders out.
Jameson
A replacement end cap to keep the bottom of a Jameson pole sealed and protected.
Gap Arborist Supply
A replacement rope for the Hipstar Flex adjustable positioning lanyard.
Gap Arborist Supply
A holder that keeps tools secured at the boom of a bucket truck.
Teufelberger
Heat-resistant 8 mm hitch cord by the foot, for climbers who tie their own hitches.
Jameson
Locking composite poles for pole saw and pruner heads, for reaching overhead limbs.
Jameson
A secure place to store a hydraulic pruner on the bucket.
Samson
A 24-strand Samson climbing line in bright colors for tree climbers.
Buckingham
A Buckingham arborist climbing harness for working climbers.
Arborwear
A heavy two-layer hoodie for cold mornings on the job.
Gap Arborist Supply
A cut-resistant flipline with a steel core for spur work and removals.
Gap Arborist Supply
A blade cover that protects your axe edge and your hands in the truck.
Jameson
A 16 in replacement pole saw blade with fast tri-cut teeth.
Sena
A communication headset for crane operators coordinating picks with the crew.
Yale Cordage
A 10.5 mm Yale rope lanyard for positioning in the tree.
Gap Arborist Supply
A replacement brush chipper knife, sized 10-1/2 x 5 x 5/8 in.
Marlow
A light, slick Dyneema throwline for setting lines high in the tree.
Samson
A thicker, slick Dyneema throwline that is easier to handle and see.
Stein
A trunk-mounted lowering device for controlled rigging on removals.
Gap Arborist Supply
A snap hook for spreading and connecting gear on the job.
Yale Cordage
A 9/16 in double braid polyester rigging line for everyday lowering.
Yale Cordage
A Yale rope positioning lanyard for climbers who want a smooth, adjustable attachment.
Husqvarna
Replacement air purge (primer) bulb for the Husqvarna T540XP Mark II top-handle saw.
Teufelberger
A light 11.5 mm arborist climbing rope that handles well for MRS and SRS work.
Gap Arborist Supply
A 30 ft rope crane sling for choking large picks on crane-assisted removals.
Courant
A large Courant gear bag for hauling a full climbing kit to and from the job.
Husqvarna
A replacement air filter for the Husqvarna 572XP professional chainsaw.
Husqvarna
Hearing protection with built-in crew communication for climbers and ground workers.
Preformed Line Products
Wedge-style dead-end grips for terminating steel strand in tree cabling systems.
DMM
A symmetrical oval carabiner that keeps pulleys and devices sitting square.
Gap Arborist Supply
A rigging reference for tree crews, trainees, and the people who train them.
Yale Cordage
A rope positioning lanyard kit built with Yale rope and DMM carabiners.
Arborwear
An Arborwear work belt with a chain design, made to pair with tree work pants.
Klein Tools
Replacement barrel sleeves and bolts for Klein climbers.
ISC
A large ISC rigging pulley for redirecting lowering lines on removals.
Honey Badger
Aluminum tree climbing spikes for climbers who spend long days on removals.
Husqvarna
A professional battery hedge trimmer with a long double-sided blade.
Husqvarna
A 10 in replacement bar for Husqvarna battery-powered pole saws.
Husqvarna
A 300mm curved pruning saw with scabbard for climbers and ground pruners.
Husqvarna
A 40 drive link replacement chain for Husqvarna battery pole saws with a 10 in bar.
Husqvarna
A replacement air filter for the Husqvarna 372XP chainsaw.
Husqvarna
A motorized rope ascender for arborists, sold without a battery or charger.
Petzl
A large pear-shaped aluminum carabiner for hitches and multiple attachments.
Courant
A chest harness that adds shoulder support to the Courant Koala saddle.
Phoenix
A hand pruner for clean cuts on twigs and small branches up to about 3/4 in.
Husqvarna
A replacement recoil starter handle for the Husqvarna 372XP chainsaw.
CMI
A CMI aluminum rigging block for 1/2 in rope, paired with a matching sling.
Samson Rope
A 5/8 in, 12-strand single braid rigging rope that is easy to splice and handle.
Gap Arborist Supply
A bag that keeps your climbing saddle clean, dry, and away from fuel in the truck.
The Splice Shop
A light rope canopy anchor for single rope technique climbers.
Teufelberger
Durable Teufelberger bags for hauling rope and climbing gear to the job.
Gap Arborist Supply
Adjustable 2–4 ft rope sling for setting blocks and pulleys on smaller stems.
ISC
Light oval clip for racking tools and spare hardware on your saddle.
ISC
Small, light rigging pulley for redirects, speed lines and lighter lowering.
Teufelberger
Sewn 10 mm hitch cord for climbers who want a consistent, grabby friction hitch.
Teufelberger
Big-diameter bull rope for heavy removals and catching large wood.
Gap Arborist Supply
Rubber keepers that hold carabiners in place so your system stays oriented.
ISC
Offset oval with a four-action gate for connections that must stay shut.
Husqvarna
High-output gas backpack blower for fast cleanup after tree jobs.
Jameson
Fiberglass pole that extends from 6 to 12 ft for pole saw and pruner heads.
Husqvarna
Light, pro-grade straight-shaft trimmer for edges, stumps and site cleanup.
Gap Arborist Supply
Double-locking steel snap with a gate rated to current ANSI requirements.
Gap Arborist Supply
Flat 4 ft webbing sling for crane picks, chokers and general rigging.
Rig Guy
Central hub that joins up to four cable runs in multi-lead cabling layouts.
Gap Arborist Supply
Vinyl cover with a foam insert that keeps a one-man bucket dry and clean.
Petzl
12 mm low-stretch kernmantle rope for fall arrest backup lines.
ISC
Auto-locking carabiner with a built-in swivel eye to keep lines from twisting.
Buckingham
Light 7 ft Dyneema strap used with fliplines and rope grabs.
Yale Cordage
Low-stretch 11.7 mm arborist climbing line for SRS and MRS.
Husqvarna
OEM-style starter pawl for 372XP and 390XP saws that won't catch on the pull.
ISC
Large steel carabiner with a wide opening and triple-action locking gate.
DMM
Smallest block in DMM's Impact line, for light rigging and redirects.
CAMP
Replacement rope bridge for the CAMP Tree Access Evo ANSI saddle.
Gap Arborist Supply
Heavy 3/4 in adjustable rope sling for anchoring blocks and lowering devices.
Yale Cordage
8 mm Beeline polyester loop prusik with an aluminum ring.
Yale Cordage
Sewn 10 mm Beeline polyester hitch cord for MRS and SRS hitches.
Petzl
Replacement upper comfort foam for Petzl STRATO helmets.
Edelrid
Replacement gaffs that keep Edelrid Talon spurs biting cleanly.
ArborTec
65 liter dry bag for ropes and climbing kit in wet weather.
Teufelberger
Long sleeve climbing shirt from Teufelberger for days in the tree.
Husqvarna
Replacement anti-vibration damper for the Husqvarna 395XP.
Silky
Replacement pivot hardware to bring a loose Silky folding saw back to tight.
Husqvarna
Replacement gaskets for servicing a Husqvarna T540XP top-handle saw.
Yale Cordage
A rope positioning lanyard in Yale Beeline, finished with an ISC triple-locking snap.
Husqvarna
An adjustable rope friction saver that fits a range of limb sizes at the tie-in.
DMM
An auto-locking carabiner with a built-in pulley wheel for redirects and pulley systems.
Husqvarna
A professional battery pole hedge trimmer with an adjustable cutting head.
Husqvarna
A commercial-grade Husqvarna zero-turn for crews that mow as well as cut trees.
Husqvarna
A gas professional hedge trimmer with a long, double-sided coarse-cut blade.
DMM
A stainless thimble that protects a spliced eye where it bears on hardware.
ISC
A durable steel offset oval auto-locker for hard-wearing climbing and rigging setups.
Petzl
A full-body fall arrest harness designed to go on quickly and fit comfortably.
Teufelberger
Teufelberger hitch cord sold by the foot for friction hitches and eye-to-eyes.
Courant
A supportive European tree climbing harness for long days in the canopy.
Teufelberger
An 11.8 mm 24-strand climbing line from Teufelberger for everyday tree work.
ART
Manufacturer replacement parts to keep a SpiderJack 3 climbing device in service.
Weaver
A rubberized scabbard to carry and protect a pole saw blade.
Distel
Lightweight carbon fiber climbing spurs with quick click-buckle straps.
Husqvarna
A narrow-gauge Husqvarna bar for small saws running 3/8 mini chain.
Petzl
An adjustable webbing foot loop for ascending rope with a handled ascender.
Sterling Rope
A 10 mm sewn eye-to-eye hitch cord from Sterling for friction hitch climbing.
Weaver
Cushioned wrap pads that make spurs more comfortable on long removals.
Marlow
A 16 mm rigging line from Marlow for lowering wood on removals.
Husqvarna
Small accessory carabiners for organizing gear, not for life support.
Forester
A rain guard that helps keep rain and debris off your face screen.
Tylaska
A machined low-friction device for rigging points and redirects.
Gap Arborist Supply
Mixed short rope and cord lengths for ground use, practice and shop jobs.
Petzl
Shoulder straps that hold a chest ascender in position for rope ascent.
Gap Arborist Supply
A 1/2 in rope sling with a spliced eye and a ring for building rigging points.
Gap Arborist Supply
A 5/8 in wire core flipline for removal climbers working around a running saw.
LogRite
Hand log tongs for lifting and dragging rounds without straining your back.
Petzl
A factory replacement bridge to put a Petzl Sequoia saddle back in service.
Yale Cordage
A Yale Cordage rope lanyard for rebuilding a worn flipline or positioning lanyard.
Husqvarna
A replacement handle insert to keep a 395XP big-bore saw solid in your hands.
Husqvarna
The small gear that drives the oil pump on a T540XP top-handle saw.
Teufelberger
A light 11.5 mm climbing line in a pink and ash color for SRT and MRS work.
ISC
Factory replacement parts for keeping a LockJack Sport in service.
DMM
A replacement rope lanyard for the DMM Nomad lanyard kit.
Husqvarna
A kid-size, battery-powered toy version of the Husqvarna 550XP.
Husqvarna
A 36 inch, 3/8 pitch, .063 gauge bar for big Husqvarna saws on large wood.
DMM
A very light non-locking wiregate for racking gear on your saddle.
Husqvarna
A tune-up parts kit for Husqvarna's 340, 353, and 346XP mid-size saws.
Petzl
A double-handled ascender built by Petzl for efficient rope climbing in trees.
Teufelberger
Teufelberger's light 11.5 mm climbing line in a subdued ash color.
Husqvarna
A replacement chain tensioner screw for the Husqvarna 395XP.
Husqvarna
A replacement carburetor for the Husqvarna 562XP Mark II.
Gap Arborist Supply
A starter set of rigging gear for lowering wood on everyday removals.
Kask
Helmet-mounted yellow earmuffs for Kask Super Plasma and Zenith helmets.
CAMP
A boot-mounted foot ascender that turns your legs into the engine of an SRT ascent.
DMM
A replacement rope bridge for the DMM Kinisi tree climbing saddle.
Gap Arborist Supply
Laminated Baltic birch pads to spread outrigger loads on soft ground.
Singing Tree
A replacement slick pin for the Singing Tree Rope Wrench.
Gap Arborist Supply
Replacement carbide teeth for grinders that take 900 series style teeth.
Teufelberger
10 mm polyester hitch cord sold by the foot for tying friction hitches.
Husqvarna
A replacement air filter assembly for the 550XP Mark II.
PFERD
A field sharpening set for keeping chainsaw chain cutting clean.
Samson Rope
A 1/2 in rigging line from Samson for everyday lowering.
DMM
A screw gate carabiner with a built-in pulley wheel to cut friction.
Silky
A long curved Silky hand saw with scabbard for cutting big limbs.
ISC
An offset D auto-locking carabiner with a locking pin for tree climbing.
Teufelberger
A firm, round 16-strand climbing line for climbers who run both MRS and SRS.
Yale Cordage
A pink and black rope lanyard sold bare so you can build it your way.
HAIX
Leather chainsaw-protective boots for fellers and ground crew on the saw all day.
DMM
An auto-locking carabiner with a captive bar that keeps the load where it belongs.
DMM
A pear-shaped HMS auto-locker with room for a hitch, a rope and a bit of hardware.
DMM
A locking DMM carabiner in matt gray for everyday climbing connections.
ISC
An offset D auto-locker from ISC for strong, tidy connections on your saddle.
KONG
A symmetric aluminum oval that keeps pulleys and devices centered.
ISA
A pocket field guide to the knots and hitches tree workers use every day.
Alliance Equipment
A replacement scuff pad that protects an aerial lift bucket from wear.
Gap Arborist Supply
A simple saw strap with a snap to keep your climbing saw tethered aloft.
Gap Arborist Supply
A basic chainsaw lanyard with a ring at each end for a clean saw tether.
Clogger
Light, breathable chainsaw pants built for climbers and busy ground crews.
KONG
A self-braking rope descender for controlled lowering and rope access work.
Petzl
A foot ascender that lets your legs do the work on a stationary rope.
Weaver
A foot loop that lets your legs help on the climb up the rope.
Climbing Technology
A handled ascender with a built-in pulley for climbing and hauling.
ART
Genuine service parts to keep a SpiderJack climbing device running right.
Rock Exotica
A rope grab for backup and progress capture on a fixed line.
DMM
A big D-shaped auto-locker with room for anchors and multiple connections.
DMM
A large-opening auto-locker with an ANSI gate rating for demanding connections.
DMM
A carabiner with a built-in pulley wheel to cut friction on redirects.
DMM
A tough locking DMM carabiner for demanding climbing and rigging connections.
ISC
A light, symmetric locking oval for pulleys, devices and racking gear.
ISC
A durable ISC auto-locker for high-wear spots on your climbing system.
Petzl
A light asymmetric D locker for devices, lanyards and bridge connections.
Petzl
A locking carabiner with a built-in pulley for tending a hitch and hauling.
Rock Exotica
A roomy aluminum auto-locker with Rock Exotica's Orca locking gate.
Rock Exotica
A rockO carabiner with a captive eye that keeps a connection in position.
DMM
A small keeper that holds a carabiner in the right position on a sling or eye.
Petzl
A small positioning ring that keeps a connector oriented where you put it.
Kong
A non-locking Kong carabiner for racking and organizing gear on the saddle.
Petzl
Ultralight non-locking carabiner with a snag-free wire gate, for racking gear.
DMM
A small DMM racking clip for keeping light gear organized on the saddle.
Petzl
A harness-mounted tool holder for racking carabiners and gear on the saddle.
ISC
A steel triple-locking snap hook for lanyards and arborist climbing systems.
ISC
Triple-locking steel snap with a swivel eye to keep lanyards from twisting.
Gap Arborist Supply
A simple steel swivel snap for tool lines, bags and light gear handling.
Reecoil
A retractable chainsaw lanyard that keeps a climbing saw close but out of the way.
Teufelberger
An elastic chainsaw lanyard that takes the snap out of a dropped climbing saw.
Weaver
A tough, no-fuss saw strap with a snap for tethering a climbing saw.
Teufelberger
A positioning lanyard kit built on Teufelberger tachyon rope, in pink.
Teufelberger
Pink tachyon lanyard with a prusik-style friction hitch adjuster.
Yale Cordage
Yale R.I.N.G. rope positioning lanyard kit terminated with a triple-locking snap.
Yale Cordage
An adjustable positioning lanyard kit built on Yale R.I.N.G. rope.
ART
The lanyard rope side of an ART Positioner system, for climbers who own the device.
Yale Cordage
Yale Imori rope made up as a replacement positioning lanyard.
Yale Cordage
Yale Safari rope made up as a replacement positioning lanyard.
Teufelberger
Teufelberger tachyon rope in Ash, made up as a replacement lanyard.
Teufelberger
Teufelberger tachyon rope in pink, made up as a replacement lanyard.
Yale Cordage
Yale R.I.N.G. rope positioning lanyard with a triple-locking snap end.
Yale Cordage
A Yale R.I.N.G. rope positioning lanyard to pair with your own adjuster.
Edelrid
A two-color cambium saver that protects bark and rope at your tie-in.
KM-III
An adjustable friction saver that fits a wide range of limb sizes.
Petzl
A ground-set, retrievable friction saver from Petzl for arborist tie-ins.
Petzl
A Petzl friction saver for protecting bark and rope at the tie-in.
Gap Arborist Supply
A small add-on that helps you pull a ring-to-ring sling out of the tree.
Sirius
A versatile friction saver that adapts to a range of limbs and tie-in setups.
Teufelberger
An adjustable Teufelberger friction saver that sizes to the limb.
Teufelberger
An adjustable anchor sling for canopy tie-ins and basal anchors.
Teufelberger
A pulley-equipped friction saver for climbers who want an easier advance on doubled rope.
Yale Cordage
A ring-style friction saver from Yale for clean, retrievable doubled-rope tie-ins.
Weaver
A carry-on-your-back gear bag for climbers who walk their kit to the tree.
Weaver
A roomy, tough gear bag for hauling climbing and rigging kit to the job.
Courant
A 36-liter Courant rope bag that keeps your line clean and ready to throw down.
Petzl
A 30-liter Petzl rope bucket that stays open for easy stuffing and clean deployment.
Reecoil
A rope bag for carrying and deploying climbing or rigging line clean.
Teufelberger
A Teufelberger bag for carrying a climbing rope and the kit that goes with it.
Weaver
A compact Weaver rope bag for shorter lines, lanyards, and access ropes.
DMM
A 6-liter DMM bag that clips to your saddle to carry small kit in the tree.
Weaver
A saddle ditty bag with a dedicated first aid pouch for climbers.
Edelrid
A collapsible Edelrid bag that springs open for tangle-free throw line.
Weaver
A medium Weaver bag that keeps throw line clean and ready to throw.
Weaver
Nesting Weaver throw line bags that stack together to save room in the kit.
Weaver
A Weaver throw line cube that stands open for fast, tangle-free line setting.
Armor Prus
A 10mm eye-to-eye hitch cord for tending a friction hitch on doubled-rope systems.
Teufelberger
An 8mm polyester loop with a thimble eye for prusik and hitch setups.
Rock Exotica
A portable load cell for measuring real forces in rigging and climbing systems.
Teufelberger
A ground tarp that keeps your climbing rope out of the dirt at the base of the tree.
SMC
Smooth, rounded rings for friction savers, bridges, and anchor builds.
DMM
A DMM swivel with multiple attachment points to stop twists in your system.
Petzl
An openable Petzl swivel that installs directly on a bridge or fixed loop.
Husqvarna
A forestry helmet system with visor, ear muffs, and quick wheel ratchet fit.
Petzl
A vented, high-visibility Vertex helmet for climbers who need to be seen.
Buckingham
A Y-style upper body harness that retro-fits a Buckingham Ergo saddle for fall arrest.
Petzl
A replacement adjustable bridge for Petzl Sequoia saddles.
Petzl
Shoulder straps that take the weight of a loaded Sequoia saddle off your hips.
Petzl
A Petzl chest harness that pairs with a sit harness for support and gear carry.
Teufelberger
Factory leg loops for the CE treeMOTION, to keep a good saddle working.
Teufelberger
A fresh back pad for the treeMOTION evo, for climbers who spend all day in the saddle.
Weaver
A replacement webbing bridge for the Weaver Cougar saddle.
Weaver
Padded saddle suspenders with a built-in water bladder for long, hot climbs.
Weaver
A traditional wide-back climbing saddle for climbers who want simple, solid support.
Weaver
A Weaver climbing saddle built for everyday tree work.
Weaver
A Weaver climbing saddle with two floating D-rings for flexible positioning.
Tree Hog
Lightweight aluminum tree spurs with L-shaped pads for removal climbers.
Tree Hog
Lightweight aluminum spurs with soft cushion pads for long removal days.
Weaver
L-shaped calf pads that make tree spurs more comfortable on long climbs.
Buckingham
Replacement screws that hold Buckingham dowel and screw style gaffs on the shank.
Buckingham
A magnetic cover that guards spur gaffs between climbs.
Buckingham
Dowel style replacement gaffs to keep Buckingham spurs biting.
Weaver
Gaff guards with bungee retention to protect spurs between climbs.
Buckingham
Replacement lower straps that hold spurs snug at the ankle.
Weaver
Leather 26 inch lower straps for keeping climbing spurs snug at the boot.
Weaver
26 inch upper straps that hold spur shanks snug below the knee.
Weaver
Webbing lower straps for spurs that handle wet days without much care.
Weaver
A 16 oz throw bag and line for setting climbing lines through thick canopy.
Petzl
A thin, slick throwline from Petzl for setting climbing lines.
Weaver
A 12 oz throw bag and line, a good all-round choice for most trees.
Arbortec
Orange replacement laces for Arbortec Scafell Lite chainsaw boots.
Arbortec
A waterproof, breathable pullover smock for climbing and groundwork in the rain.
Arborwear
A heavy, two-tone pullover for cold days on the crew, in black and safety yellow.
Teufelberger
A warm fleece mid-layer for climbing in the cold, in size large.
Arborwear
A lightweight, bright work tee for hot days in the tree and on the ground.
Jameson
A 13 inch tri-cut pole saw blade with a hook for clearing hangers.
Silky
A 330 mm taper-ground replacement blade for the Silky Gunfighter saw.
Silky
A fresh 390 mm curved blade for the Silky Ibuki, so a tired saw cuts like new.
Silky
A new curved blade for the Zubat Arborist Edition, the saw many climbers live with.
Jameson
A compact folding pruning saw with a Tri-Cut blade for ground and light climbing work.
Jameson
A fixed-blade pruning saw that comes with its own scabbard, ready for the saddle.
Silky
A 330 mm curved Silky with large teeth for fast cuts on thicker limbs.
Jameson
A vinyl bag that keeps pole sections, pruner heads and saw heads together.
Jameson
A ready-to-work Jameson pole saw head with LS fiberglass pole sections.
Jameson
A pole saw head and 16 in Tri-Cut blade to put on your own poles.
Weaver
A clip-on 8 in pouch that keeps your hand pruners on your hip.
Weaver
One scabbard for a 14 in hand saw with a pouch for your pruners.
Weaver
A rubberized 14 in curved scabbard with a snap to keep the saw in place.
Jameson
A 4 ft fiberglass pole section to build or extend a Jameson pole kit.
Jameson
A light 6 ft Jameson pole section for pole saws and pruners.
Husqvarna
A 32 in lopper with the leverage for branches too thick for hand pruners.
Husqvarna
A pocket-size hand pruner for clean cuts on small stems all day.
Jameson
A wide-jaw pole pruner head with double pulley power, adapter and rope included.
Jameson
A Jameson pole pruner head with the CompositLock connection.
Jameson
A tough Jameson pole pruner head for crews who cut overhead all day.
Jameson
A complete Jameson pole pruner kit built around a fixed pulley head.
Notch
Replacement friction parts to keep a Notch Rope Runner in service.
Rock Exotica
A mechanical friction device for SRS and MRS climbing with smooth, adjustable control.
Yale Cordage
A Yale Cordage rope lanyard supplied without snaps so you choose your hardware.
Safewaze
A 6 ft stretch lanyard with a low-profile shock pack for bucket and lift work.
Safewaze
A simple, low-cost full body harness for bucket truck and lift fall protection.
Arbortec
A 55 liter DryKit bag that keeps rope and climbing kit clean and dry.
Sportflex
A thin beanie that fits under your helmet to keep your head warm in winter.
Sterling Rope
A multi-loop webbing sling for adjustable rigging anchors and attachments.
LAND
A replacement face visor for LAND AeroPro and ClimbPro helmets.
Estex
A stiff Polycomb insert that helps a 1-man Estex bucket cover hold its shape.
Safewaze
A short extension that brings your harness back D-ring within easy reach.
Safewaze
An energy absorbing lanyard with a soft eye that girth hitches to your harness.
SafeWaze
A shock-absorbing fall arrest lanyard for bucket truck and aerial lift operators.
Husqvarna
A solid, heavy-duty Husqvarna bar for 3/8" .050" chain on pro saws.
Clogger
Lightweight, stretchy chainsaw pants cut for climbing arborists.
Clogger
Protective chainsaw trousers from Clogger for day-in, day-out saw work.
Eagle
A galvanized steel 5 gallon safety can in yellow, the color crews use for diesel.
Eagle
A replacement pour funnel for Eagle steel safety cans.
Gap Arborist Supply
A replacement brush chipper knife, 7-1/4 in long, 4-1/2 in wide, 1/2 in thick.
Gap Arborist Supply
A replacement brush chipper knife, 7-1/4 in long, 4 in wide, 1/2 in thick.
Spencer
A 35 ft replacement blade for a Spencer logger's tape.
Husqvarna
Steel log tongs for grabbing and dragging rounds and short logs.
LogRite
A light, strong aluminum-handled peavey for rolling and positioning logs.
Husqvarna
A light rear-handle 36V battery saw with a 14 in bar for ground and cleanup work.
Husqvarna
A replacement air filter assembly for the Husqvarna 372XP.
Echo
A replacement air filter cover for the Echo CS-2511T top-handle saw.
Husqvarna
A replacement filter felt for the Husqvarna 395XP air filter.
Husqvarna
A cylinder base gasket for the Husqvarna 550XP Mark II.
Husqvarna
A replacement clutch assembly for the Husqvarna 390XP.
Husqvarna
A replacement cylinder gasket for the Husqvarna 550XP Mark II.
Husqvarna
A replacement anti-vibration spring for the Husqvarna 395XP.
Husqvarna
A service kit with common wear parts for the Husqvarna 545 and 550XP.
Husqvarna
A replacement clutch assembly for the Husqvarna 372XP X-Torque.
Husqvarna
A replacement cylinder gasket for the Husqvarna 395XP.
Husqvarna
A replacement fuel hose for the Husqvarna 562XP.
Husqvarna
A replacement inlet pipe, or intake boot, for the Husqvarna 395XP.
Husqvarna
A replacement seal for the Husqvarna 372XP X-Torque.
Husqvarna
A replacement seal for the Husqvarna T540XP top-handle saw.
Husqvarna
A small spring that returns the starter pawl on Husqvarna saws.
Husqvarna
A replacement washer for the front anti-vibration mount on the Husqvarna 395XP.
Green Manufacturing
Carbide stump grinder teeth for the Greenteeth 1100 series pocket system.
Green Manufacturing
A replacement bolt for Greenteeth pockets and teeth on a stump grinder wheel.
Stein
A replacement screen panel for Stein's portable stump grinding guard.
Weaver
Sewn webbing loops for light rigging points, redirects, and gear anchors.
Notch
A small grapple for snagging stuck lines and hung gear out of the canopy.
Husqvarna
Service parts for a routine tune-up on the 545 Mark II and 550 XP Mark II saws.
Husqvarna
A replacement drive belt to keep a Husqvarna K770 power cutter on the job.
Gap Arborist Supply
A long ship auger bit for drilling clean holes for tree cabling hardware.
SMC
A compact rescue-grade pulley for redirects, haul systems, and light rigging.
SMC
A compact SMC pulley in the Apex Direct style for redirects and haul systems.
Gap Arborist Supply
A 3/4 inch rigging line for heavy blocking and big removal work.
Marlow
A 14mm Marlow rigging line for everyday pruning and removal rigging.
Marlow
A heavier 18mm Marlow rigging line for big removals and blocking down wood.
Teufelberger
A 5/8 inch polyester double braid line for rigging, tag lines, and pulling.
CMI
A heavy-duty CMI rigging block for large rope and big removal work.
CMI
A lighter aluminum CMI block for everyday removal rigging up to 3/4 inch rope.
ISC
A small ISC rigging pulley for pruning and light removal rigging.
ISC
A mid-size ISC rigging block for heavier removals with rope up to 20mm.
SMC
A larger SMC rescue-grade pulley for haul systems and light rigging.
Rock Exotica
A compact rigging plate for organizing anchors and connectors in rope systems.
Petzl
A swiveling double pulley for haul systems, redirects, and rope work.
Gap Arborist Supply
A pulley shaped to tend a prusik, so a haul system holds every pull.
Rock Exotica
A swiveling Rock Exotica pulley that loads rope without unclipping.
Petzl
A swivel pulley with a becket for building compact haul systems.
ISC
A friction device for lowering light limbs and brush in the canopy.
CMI
A dedicated bag to keep a RopeJack or haul kit together and protected.
Petzl
A double pulley with built-in progress capture for compact haul systems.
Gap Arborist Supply
An adjustable rope sling with a medium ring for quick rigging points.
Gap Arborist Supply
A 4 foot Tenex soft anchor sling for rigging points and anchors.
Tylaska
A machined Tylaska ring for low-friction rigging points and redirects.
Climbing Technology
A durable steel ring for friction savers, anchors, and redirects.
Notch
A compact rope grab for climbers who want a clean bite on the line.
Gap Arborist Supply
Fresh lanyard rope for climbers who already own the hardware.
Marlow
A 9mm hitch cord for climbers who like to tune their own friction hitch.
Yale Cordage
A traditional braid climbing line from Yale for working tree climbers.
Courant
A 16-strand arborist climbing line from Courant for everyday tree work.
Samson
The green colorway of Samson's 11.7mm ArborFreak climbing line.
Yale Cordage
A half-inch 16-strand Yale climbing line in a bright, easy-to-spot colorway.
Courant
A static arborist climbing line from Courant in high-visibility yellow.
Samson
A 3/4 in rigging line for crews lowering heavy wood.
Teufelberger
8mm polyester hitch cord, cut to the length you need.
Teufelberger
The 9.3mm version of Teufelberger's popular Epicord hitch cord, sold by the foot.
Yale Cordage
10mm Bee Line hitch cord from Yale, cut to the length you need.
3M
Light, self-adjusting 3M safety glasses with a gray lens for sunny jobs.
Edge Eyewear
Sporty wraparound safety glasses with a smoke lens for bright days.
ERB Safety
Sport-style ERB safety sunglasses for crews working in bright sun.
ERB Safety
ERB safety sunglasses with a sporty frame for bright days on the crew.
ERB Safety
The metallic-frame version of ERB's Free Ride safety sunglasses.
ERB Safety
Light sport-style ERB safety sunglasses for bright days.
ERB Safety
Sport-style ERB safety sunglasses for long days in the sun.
ERB Safety
Low-cost mirrored safety sunglasses for crews working in open sun.
ERB Safety
Basic tinted safety glasses that are cheap enough to keep everywhere.
Kask
A mesh face visor made to clip onto Kask Super Plasma helmets.
Kask
A plastic mesh face screen made for Kask Zenith helmets.
Kask
The side adaptors that let a Kask Zenith take a visor and earmuffs.
Petzl
A full mesh face shield for Petzl's 2019 and later Vertex and Strato helmets.
Petzl
A clear eye shield that mounts on 2019 and later Petzl Vertex and Strato helmets.
Pfanner
Fine mesh replacement visor for the Pfanner Protos Integral helmet.
Gap Arborist Supply
A jobsite first aid kit for the truck, chipper or gear bag.
Petzl
A preassembled pulley haul kit for rescue and mechanical advantage.
Husqvarna
Chainsaw gloves with saw protection on the left hand and good dexterity.
3M
Corded earplugs in a case, ready for saw, chipper and grinder work.
3M
Slim helmet-mounted earmuffs for saw work under a hard hat or climbing helmet.
3M
Fresh cushions and foam inserts to restore the seal on Peltor X4 earmuffs.
JBC
A 36 inch Road Closed sign for full street closures on removals and crane jobs.
JBC
A 36 inch advance warning sign for roadside tree and utility work.
Plasticade
A plastic Tree Work Ahead warning sign for roadside crews.
Gap Arborist Supply
A sewn-eye rope bridge to replace a worn bridge on your climbing saddle.
Gap Arborist Supply
An 11mm static rope bridge for swapping out a worn saddle bridge.
Gap Arborist Supply
A simple ring-to-ring friction saver for a cleaner tie-in and less rope wear.
Gap Arborist Supply
A heavy rope rigging sling with Tylaska hardware for big rigging points.
Gap Arborist Supply
A short polyester round sling for crane picks and rigging points.
Gap Arborist Supply
A light rope connector that replaces a steel shackle in many rigging setups.
Gap Arborist Supply
A mid-size rope rigging sling with Tylaska hardware for everyday removals.
Husqvarna
Two 3/16 in. round files for touching up chain on the job.
Husqvarna
Two 5/32 in. round files for small-pitch chain on top-handle and light saws.
DMM
A steel auto-locking modified D for spots where aluminum wears out fast.
Petzl
A replacement steel-core lanyard rope for the Petzl Microflip adjuster.
Pferd
A portable vise that clamps your bar to a stump for field sharpening.
The Splice Shop
A bullet-shaped throw weight that slips through tight branch unions.
Courant
A dedicated throw line bag that keeps line ready to run on the next throw.
Pferd
An 8 in. flat file for keeping chain depth gauges at the right height.
Pferd
A simple wooden handle that makes chain filing safer and more accurate.
Nothing matches those filters.