CMI
CMI Anchor Sling
A tough webbing anchor sling for setting tie-ins and anchors around stems and limbs.
Typical $35
Brand
CMI
CMI makes climbing and rescue hardware including anchor slings, pulleys and carabiners. Arborists use CMI gear for anchors and climbing setups.
- Anchor slings
- Pulleys
- Carabiners
- Rope grabs
CMI
CMI Micro Rescue Pulley
A small, strong pulley for hitch tending, haul systems and rescue kits.
Typical $40
CMI
CMI Foot Ascender
A boot-mounted rope ascender that turns every step into upward progress.
Typical $95
CMI
CMI 5/8" Steel Arborist Block
A steel-sheave rigging block for 5/8 in lowering lines on removal work.
Typical $150
CMI
CMI Heavy Duty Loop Runners
Sewn webbing loops for quick anchors, redirects and light rigging.
Typical $18
CMI
CMI Micro Hitch Tending Pulley
A small pulley that sits under your hitch and keeps slack moving as you climb.
Typical $40
CMI
CMI Shackle Pulley
A compact pulley with an attached shackle for quick redirects and light hauling.
Typical $55
CMI
CMI Friction Saver with Aluminum Rings
A ring-and-ring friction saver from CMI with light aluminum rings.
Typical $79
CMI
CMI LCD Lowering Control Device
Friction device that helps the ground crew control loads on a rigging line.
Typical $289
CMI
CMI Rigging Block for 1/2 in Rope
A rigging block sized for 1/2 in rope for light lowering work.
Typical $149
CMI
CMI RP145 Arborist Block
CMI's arborist rigging block for redirecting lowering lines on removals.
Typical $239
CMI
CMI 2 Inch Service Pulley
A compact 2 in CMI pulley for hauling and light rope systems.
Typical $45
CMI
CMI Stainless Steel Pulley for 5/8 in Rope
A tough stainless steel pulley for 5/8 in rope on hard-working rope systems.
Typical $99
CMI
CMI Speed Line Kit
Hardware to set up a speedline and send brush and wood to a clear drop zone.
Typical $400
CMI
CMI 1/2 in Aluminum Rigging Block with 1/2 x 5 Sling
A CMI aluminum rigging block for 1/2 in rope, paired with a matching sling.
Typical $229
CMI
CMI 1" Arborist Rigging Block
A heavy-duty CMI rigging block for large rope and big removal work.
Typical $329
CMI
CMI 3/4" Aluminum Rigging Block
A lighter aluminum CMI block for everyday removal rigging up to 3/4 inch rope.
Typical $239
CMI
CMI RopeJack Bag
A dedicated bag to keep a RopeJack or haul kit together and protected.
Typical $45
CMI
CMI Neptune Rigging Hub
A multi-point hub from CMI for tidy anchors with several connectors.
Typical $65
CMI
CMI Throw Line Cube
A collapsible cube that keeps throw line ready to fly and folds flat in the truck.
Typical $40
About CMI
CMI builds gear with roots in rescue work, where hardware has to be simple and tough. For tree work, CMI anchor slings are a common way to set a basal or canopy anchor, and their pulleys and rope grabs fit into climbing and haul systems.
Check ratings and rope compatibility for every piece, follow the manufacturer's instructions, and inspect slings and hardware before every use.