Husqvarna Metal Blade 14" (Blue EHS)

This Husqvarna metal blade is a 14-inch replacement blade in the blue EHS finish for compatible Husqvarna equipment. Check your tool's manual for the approved blade, arbor size, and guard before fitting it.

Matching the blade to the tool

Blades are not universal. The arbor size, rated speed, and guard on your machine all need to match the blade, and only blades listed in the operator's manual should go on a given tool. If you are unsure, compare the part number on your old blade with the parts list for your machine.

Fitting the wrong blade can overload the tool or leave the blade unguarded.

The blue EHS finish makes the blade easy to spot in a truck box or shop shelf, which helps keep it with the right machine. If you run several Husqvarna tools, label blades by machine.

Keep the old blade until the new one is fitted and checked, so you can compare diameter, arbor hole, and tooth pattern side by side. Any mismatch is a reason to stop and confirm the part.

Safe use and care

Always fit the correct guard, tighten the blade fastener as the manual specifies, and inspect the blade for cracks, bends, or missing teeth before each use. Replace a damaged blade rather than straightening it.

Store spare blades flat and dry, with the cutting edge covered, so the teeth stay sharp and no one grabs an exposed edge.

Wear eye, face, hearing, and leg protection as the manual directs, and keep bystanders clear. More landscaper tools are in this section.