Silky
Silky GomTaro Pro-Sentei 300mm Hand Saw
A straight-bladed 300 mm Silky pruning saw for clean, controlled cuts.
Hand Saws & Scabbards
Representative photo. Check the retailer listing for the exact model, color and size.
Photo: Dave has a go with the pruning saw by jennifrog, CC BY 2.0
A 15-inch curved pull-stroke pruning saw for climbers and ground crews.
The Fanno 15-inch curved blade hand saw is a pull-stroke pruning saw for climbers and ground workers who need clean cuts on limbs too big for loppers. The curve helps the teeth bite on overhead and awkward cuts.
A 15-inch blade handles small to mid-size limbs in pruning cuts and deadwood work, and it is long enough to reach past a branch collar without crowding your hand. The curve pulls the teeth into the wood, which helps when you are cutting above your head or at an odd angle from the saddle.
Make a proper pruning cut just outside the branch collar, and undercut larger limbs to stop the bark from tearing.
Climbers often carry a curved saw on the saddle for fast limb removal and a smaller straight saw for detail cuts. A 15-inch blade sits in the middle, long enough for bigger cuts while still easy to handle on a lanyard. Keep your cuts controlled and clear of your rope and lanyard at all times.
Keep it in a scabbard on the saddle so the teeth are covered when not in use. Clean off sap after work, keep the blade dry, and replace the blade when it dulls rather than forcing it.
Keep a spare blade in the truck. On a big pruning job, switching to a sharp blade halfway through the day speeds up cutting and leaves cleaner wounds on the tree.
See other hand saws and scabbards. Always cut away from your lifeline and lanyard.
| Brand | Fanno |
|---|---|
| Blade length | 15 in |
| Blade | Curved |
Specs are from the manufacturer's published figures where available. Confirm against the product listing before you buy.
Curved blades bite well on overhead and pulling cuts. Straight blades are often preferred for precise flush work. Many climbers carry one of each.
Most pull-stroke pruning saw teeth are hardened and are replaced rather than sharpened. Check the manufacturer's guidance.