DMM
DMM Captain Hook
A quick-clip accessory hook for keeping tools and gear within reach aloft.
Other Climbing Gear
Representative photo. Check the retailer listing for the exact model, color and size.
Photo: D75_8819-1 by Mark F. Levisay, CC BY 2.0
Webbing sold by the foot for gear loops, tethers and other non-life-support jobs.
Bulk webbing by the foot is flat synthetic webbing sold in whatever length you need. Tree crews use it to make gear loops, tool tethers, bag straps and tie-downs, buying only as much as the job requires.
A few feet of webbing solves a lot of small jobs. Tie a loop to hang a hand saw on the saddle, make a handle for a rope bag, strap a gas can in the truck bed, or wrap a branch to keep a throw line from sawing into bark. Buying by the foot means you get the exact length and keep the rest on the roll.
Heat-seal the cut ends with a lighter or hot knife so they do not unravel. Other small gear is in other climbing gear.
Webbing is also useful on the ground for bundling brush piles for hauling, tying off tarps, or making a quick handle for dragging a bag of rigging gear across a lawn. A roll in the truck often saves a trip to the hardware store.
Knotted or homemade webbing should not be part of any climbing or rigging system that holds a person or a load of wood. Life-support slings and lanyards must be manufactured, rated and certified, and must meet ANSI Z133 and the maker's instructions.
Keep webbing away from saw fuel and sharp edges, and replace it when it shows cuts, fraying or sun fading. It is cheap, so there is no reason to keep using worn pieces.
| Type | Flat synthetic webbing |
|---|---|
| Sold by | The foot |
| Use | Gear loops, tethers, tie-downs (not life support) |
Specs are from the manufacturer's published figures where available. Confirm against the product listing before you buy.
No. Use a manufactured, rated friction saver for anything in your climbing system.
Melt the cut ends carefully with a flame or hot knife until the fibers fuse.