Adjustable Pole Climbing Strap

This adjustable pole strap is one of the simplest pole climbing straps you can buy: a sturdy strap with snaps that wraps the pole and clips to your saddle D-rings. It holds you in position on spurs while you work with both hands.

How pole straps work

A pole strap goes around the pole and clips to both side D-rings on your saddle. You lean back against it, your spurs hold your feet, and you have both hands free to work. Adjusting the length lets you choose how far back you sit.

On trees, a flipline with a rope or wire core is usually a better choice because of limbs and the saw. Pole straps are best on smooth poles and spars.

Pole straps are also handy as a utility positioning strap on large, clean spars where you do not need to pass limbs. The flat strap spreads load around the stem, which is easier on bark than a thin rope.

Before you climb

Inspect the strap for cuts, abrasion and stitching damage, and the snaps for wear and correct closure. Make sure the snaps are compatible with your D-rings. Life-support gear has to meet the applicable standard and the manufacturer's instructions, get inspected before every climb, and be used only by trained climbers.

For tree work, see our fliplines and lanyards.

Keep the strap away from sharp edges, climbing spikes and the saw. Wash off mud and sap with mild soap and water, dry it out of direct sun, and retire it if the stitching or webbing shows damage. Store it away from fuel, oil and chemicals.