Oregon Stihl MS200T Chain, 3/8 Low Pro x .050

This Oregon replacement for Stihl MS200T chain is a 3/8 low profile, .050 gauge loop that fits the classic top-handle climbing saw. A sharp chain is what lets a small saw make clean pruning cuts and quick limb removals aloft.

Matching your MS200T

The MS200T ran 12 and 14 in bars in 3/8 low profile and .050 gauge. Count the drive links on your old loop or read your bar to choose the right length, typically 44 links on a 12 in bar and 50 on a 14 in.

Many climbers keep two or three sharp loops in the truck so the saw never goes up dull. Browse more loops in chainsaw chain.

The MS200T was discontinued, but many are still working in trees, and newer Stihl top-handle saws often use a similar chain size. Confirm your bar stamp before you assume it is the same.

Sharpening and safe use

Low profile chain uses a smaller file than standard 3/8. Use the size Oregon lists, hold a steady angle, and keep depth gauges in spec. A dull chain makes you push the saw, which is exactly what you do not want aloft.

Top-handle saws are for trained arborists working in the tree, secured with a lanyard and a separate tie-in. Follow ANSI Z133 and the saw manual.

Keep the saw clean and the chain tensioned so it does not throw off when you cut at odd angles. A sharp chain lets a small top-handle saw make clean pruning cuts without tearing bark, which is better for the tree as well as for you.