5/8 in x 30 ft Standard Crane Sling

This 5/8 in x 30 ft standard crane sling gives you the reach to choke large-diameter trunks and wide tops on crane-assisted tree removals. The standard version is a practical choice for crews that run crane jobs regularly and want a sling they can replace without worry.

Using a crane sling on removals

On a crane job the climber sets the sling around the piece, the operator takes tension, and the cut is made only once the crane has the weight. A 30 ft sling gives you enough length to choke big trunk sections and spread-out tops, or to double-wrap a smaller piece for a better bite.

Choke high enough above the cut that the piece hangs balanced, and keep the sling clear of the kerf. Compare other crane slings if you need a shorter or heavier option.

Standard and premium slings differ mainly in rope and construction, so read the tag on the sling you receive rather than assuming a capacity.

Inspection and ratings

Before each pick, look over the full length for cuts, chafed or melted fibers, and stiff spots, and check the eyes and splices. Retire the sling if you find damage or if the tag is missing or unreadable.

Know the weight of the piece and the rated capacity for the hitch you are using; a choker hitch reduces capacity. Rig only within the rated strength of every component, inspect gear before each job, and make sure the crew is trained in rigging practice under ANSI Z133 and the manufacturer's instructions. Crane work also requires a qualified operator and a pre-lift plan.