Spring-Loaded Stand for Roll-Up Traffic Signs

A spring-loaded sign stand holds a roll-up traffic sign upright on a roadside tree job, and the springs let the sign flex in gusts and passing traffic instead of blowing over. It folds flat so it rides in the truck with the signs.

Why the springs matter

A rigid stand catches every gust and every truck that passes close, and a sign lying in the road is no help to anyone. Spring-loaded stands let the sign tip back and return on its own, so it stays readable through a windy afternoon. Most have adjustable legs to sit level on a crowned road or soft shoulder.

Pair the stand with signs and cones from our traffic control section to build a complete roadside kit.

Look for a stand whose leg spread and sign clamp suit the size of roll-up signs your crew carries. A stand that is too small for the sign blows over in wind, no matter how good the springs are. Weighted bases or sandbags help on very windy days.

Setting up a work zone

Tree work beside a road needs advance warning so drivers slow down before they reach the chipper and the drop zone. Place signs far enough ahead for the road speed, follow the MUTCD and any local or permit requirements, and use trained flaggers where traffic must be stopped.

Check the stand's springs, pins and leg locks before each job, and keep the sign face clean so it stays reflective. Take signs down as soon as the work zone is cleared so drivers trust them when they see them.