Courant
Courant Kalimba Bubblegum 11.9 mm Climbing Rope
A supple 11.9 mm 24-strand climbing line in a high-visibility pink colorway.
24-Strand Rope
Representative photo. Check the retailer listing for the exact model, color and size.
Photo: Coiling the Rope by blachswan, CC BY 2.0
A light 11.5 mm arborist climbing rope that handles well for MRS and SRS work.
Teufelberger Tachyon is a light, supple 11.5 mm climbing rope for arborists who want a line that feels easy in the hand and runs cleanly through hitches and mechanical devices. This green and blue colorway makes it easy to pick out from rigging lines on a busy job.
Tachyon is aimed at climbers who want a lighter, more flexible rope than a heavy 1/2 in work line. At 11.5 mm it sits in the sweet spot for most current friction hitches and mechanical devices, and it is easy to haul up through a long canopy.
It suits everyday pruning, spending long days moving through the crown, and removals where you want a rope that does not fight you. Check that your hitch cord and device are rated for an 11.5 mm rope before you climb on it. Compare other 24-strand climbing ropes if you want a firmer or heavier line.
Keep the rope in a bag away from saw fuel, bar oil, and sharp tools, and do not stand on it in the truck. Wash it per the maker's instructions when it gets loaded with sap and grit.
Inspect the cover and feel the core along its full length before each climb for cuts, glazing, flat spots, and stiffness. Retire it if you find damage. Life-support gear must meet the applicable standard and the manufacturer's instructions, be inspected before every climb, and be used only by trained climbers working to ANSI Z133.
| Diameter | 11.5 mm |
|---|---|
| Use | Arborist climbing, MRS and SRS |
| Color | Green and blue |
| Brand | Teufelberger |
Specs are from the manufacturer's published figures where available. Confirm against the product listing before you buy.
Many climbers use 11.5 mm ropes on SRS, but check that your specific device is rated for this rope before use.
Pick a length that is at least twice the height of the tallest tie-in you expect for MRS. For SRS you need roughly the height of your anchor plus extra for basal setups.