Sterling Rope
Sterling Shock Cord (By the Foot)
Stretchy accessory cord cut to length for gear tethers, bag closures and tie-downs.
Tech Cordage
Representative photo. Check the retailer listing for the exact model, color and size.
Photo: IMG_0397 by hojaleaf, CC BY 2.0
Heat-resistant 8 mm hitch cord by the foot, for climbers who tie their own hitches.
Teufelberger 8mm HRC ThermaShield hitch cord is a heat-resistant cord sold by the foot for tying friction hitches. Climbers buy it by length to build their own hitch cords and to suit the hitch they tie.
Every climber has a hitch they like, and each one uses a different length of cord. Buying by the foot lets you cut a cord to suit a Distel, VT, or Michoacan, and to tie spare lengths. Hitch cord wears fast, so a few extra feet in the truck is cheap insurance.
A friction hitch generates heat on a fast descent, and a heat-resistant cord holds up better. An 8 mm cord is a common size for 11 to 13 mm climbing lines. Browse more tech cordage for other options.
Teufelberger is an Austrian rope maker well known to arborists for climbing lines and cordage, and its hitch cords are made to pair with its own climbing ropes.
Hitch performance depends on the climbing line, the hitch, and wear. Test grip and release low to the ground on your own line before climbing on it.
Life-support gear must meet the applicable standard, follow ANSI Z133 and the manufacturer's instructions, be inspected before every climb, and be used only by trained climbers. Hitch cord is a wear item. Retire it when it glazes, stiffens, flattens, or shows cover damage, and never use a cord that has been shock loaded.
Store hitch cord out of the sun and away from fuel and bar oil, and keep track of how long it has been in service.
| Brand | Teufelberger |
|---|---|
| Diameter | 8 mm |
| Sold by | The foot |
| Type | Hitch cord |
Specs are from the manufacturer's published figures where available. Confirm against the product listing before you buy.
It depends on the hitch and how you terminate it. Many climbers buy several feet more than one hitch needs.
Sewn or spliced terminations should be made by a qualified manufacturer. If you tie terminations, use knots approved for the cord and your system, and test them.