Independent arborist gear picks · Typical prices shown, checked at the retailer

Arborist Chainsaws

The right arborist chainsaw depends on where it runs: in the tree, on the ground or in the big wood. These saws cover top-handle climbing saws, mid-size professional saws, large felling saws and a pole saw.

16products1brands

16 shown

Husqvarna

Husqvarna 372XP Chainsaw

The classic 70 cc pro saw for removals, bucking and storm cleanup.

Typical $1,099

Husqvarna

Husqvarna 395XP Chainsaw

A 90 cc class saw for big removals, large hardwood and storm work.

Typical $1,399

Husqvarna

Husqvarna 572XP Chainsaw

Husqvarna's modern 70 cc pro saw for removals, bucking and storm cleanup.

Typical $1,149

Husqvarna

Husqvarna 592XP Chainsaw

A modern 90 cc class pro saw for big wood, storm work and large removals.

Typical $1,549

Husqvarna

Husqvarna 585 Chainsaw

A big rear-handle Husqvarna saw for felling and bucking large timber.

Typical $1,000

Buying guide

Matching the saw to the job

Top-handle saws are light and compact for one-handed control aloft, and are meant only for trained operators working in the tree. Mid-size rear-handle saws are the workhorses for limbing, bucking and smaller removals. Large saws in the 70 cc and up class pull long bars through big trunks and stumps.

A gas pole saw reaches limbs from the ground for clearance pruning. Whatever the saw, check the chain brake, chain catcher and throttle lockout daily and wear full PPE.

Gas saw ownership

Run fresh, properly mixed fuel or premix, keep air filters clean, and sharpen chain often. A saw that is hard to start or bogs under load usually needs a clean filter or fresh fuel before anything else. For deeper issues, take it to a servicing dealer.

Pick bar length to match the work, not the biggest bar the saw will pull. A shorter bar is lighter, easier to control and less prone to kickback. ANSI Z133 sets requirements for chainsaw use in tree work, including starting procedures and PPE; follow it and the owner's manual. Training is the most important accessory any saw can have.

Common questions

What chainsaw do most arborists climb with?

Most climbers use a gas or battery top-handle saw with a short bar. Use top-handle saws only in the tree and only with proper training.

Free tool2-Stroke Fuel Mix CalculatorExactly how much 2-stroke oil to add for any can size and ratio, in ounces and milliliters.