ANSI Arborist Crane Tie-In Point

A crane tie in point is a dedicated attachment that lets a climber connect to a crane hook block separately from the load rigging. This version is the assembly without carabiners, for crews that supply their own rated connectors.

Where it fits

On crane jobs, the climber may ride the hook into the tree or need a secure attachment to the hook block while a pick is rigged. A dedicated tie-in point gives a clear, inspectable connection and helps keep the climber's attachment independent from slings and chokers on the load.

This listing is the tie-in point alone, for crews that already carry the connectors their procedures specify.

Safety

Crane-assisted tree work needs a qualified crane operator, a signal person, and an agreed lift plan. Use only rated, compatible locking connectors, and inspect everything before each lift. See also friction savers for tree anchors.

Plan the attachment and climber position with the crane operator before each lift, and agree on signals in advance. Keep the climber's connection separate from the load rigging at all times.

If the tie-in point shows any cuts, abrasion, heat damage, or contamination, retire it. Keep a written inspection record with the gear, as many crane procedures require.

Store it clean and dry, away from chemicals and sharp hardware, and keep it in a dedicated bag so it is not mixed up with rigging slings or used for loads by mistake.

Life-support gear must meet the applicable standard (ANSI Z133 and the manufacturer's instructions), be inspected before every climb, and be used only by trained climbers.