ANSI Arborist Crane Tie-In Point with Carabiners

An arborist crane tie in point is a dedicated connection that lets a climber attach to a crane hook or load line when being flown into position. This version comes with carabiners, so the assembly arrives ready to inspect and use.

How it is used

On crane-assisted removals, the climber is sometimes lifted into the tree or rides the hook to a pick point. ANSI Z133 sets specific requirements for crane-assisted climbing, and the climber's connection should stay independent of the load rigging. A dedicated tie-in point gives a clear, rated attachment on the crane's hook block.

This version includes carabiners, so you have matched connectors for the assembly.

Safety and inspection

Crane work requires a qualified crane operator, a qualified signal person, and a plan agreed before the lift. Inspect the tie-in point and connectors before every use and retire anything with wear, cuts, or deformation. Compare other anchors in friction savers.

Plan where the tie-in point sits on the hook block before the lift, and make sure everyone on the ground knows how the climber is connected. Use clear hand signals or radios agreed in advance.

Keep the climber's tie-in separate from slings and chokers on the load so a load release never affects the climber's connection.

Store the tie-in point clean and dry, away from chemicals and sharp hardware in the truck. Keep the manufacturer's paperwork and inspection records with it so they are available on site.

Life-support gear must meet the applicable standard (ANSI Z133 and the manufacturer's instructions), be inspected before every climb, and be used only by trained climbers.