Teufelberger KM III Static Rope by the Foot

The Teufelberger KM III Static Rope is a low-stretch static rope for SRS climbing and access lines. Sold by the foot so you can cut exactly the length you need. Here is how it handles on the job, what to check before you buy, and how to keep it in service.

How it climbs

KM III by the foot lets you buy exactly the length you need of this classic static kernmantle rope instead of a fixed hank. That suits access lines cut to your typical tree height, short lines for anchors and redirects, and replacing a worn section of a system without paying for rope you will not use.

In a static kernmantle rope the core carries most of the load and the sheath protects it from abrasion. Because it stretches very little, more of each stroke on an ascent turns into height, which is why low-stretch rope is common for SRS climbing and access lines. The flip side is that it absorbs little energy, so it is not meant to catch a fall with slack in the system.

Compatibility, inspection and care

Before you buy, check the diameter range of your hitch cord, ascenders and descent device, since compatibility is set by those makers. You can compare it with the other static climbing ropes we carry.

Climbing rope is life-support equipment. It must meet the applicable standard, ANSI Z133 and the manufacturer's instructions. Inspect it before every climb for cuts, glazing, sheath damage and soft or stiff spots, keep it away from saws, fuel and bar oil, and retire it when in doubt. Get trained before you climb.