Thimble Loop Rigging Sling, 3/4 x 35 in with 28mm Ring

This thimble loop rigging sling pairs 3/4 rope, a 35 in length, and a 28mm ring so you can choke a stem and set up a quick rigging point. The 3/4 in version is the heavier choice for bigger limbs and wood where you want more strength and more abrasion margin around the trunk.

How a ring sling works on the job

A ring sling is the simplest way to build a rigging point where there is no good crotch. Wrap the stem, pass the thimble loop through the ring, and cinch it down; the ring then becomes the anchor for a block or a lowering line. Because it chokes, it holds its position on a vertical spar better than a basket hitch.

The thimble keeps the loop open and protects the rope where it bears on hardware, so you can clip a carabiner or shackle into it without crushing the eye. The 3/4 in version is the heavier choice for bigger limbs and wood where you want more strength and more abrasion margin around the trunk. Keep the 35 in length in mind: it suits small to medium stems and will not wrap a large trunk.

Sizing, inspection, and care

Match the sling to the wood you are actually taking down and to the rest of the system, including the rope and block. Browse other heavy-duty rigging slings if you need longer or stronger options.

Check the rope for cut strands, glazing, and stiff spots, and look at the ring and thimble for grooves, cracks, or deformation before each job. Rig only within the rated strength of every component in the system, inspect gear before each job, and make sure the crew is trained in rigging practice under ANSI Z133 and the manufacturer's instructions.